Introduction: Homerun uses wireless magnetic sensors to supply technology, safe and clean; carefully designed 20 tone channel, tone low to 20dB: through triple filter, drain water source. The external equipment is equipped with the design of separation of internal and external buckets, and has intelligent functions such as anti failure system, material protection system, core alarm and so on. With the gurgling water of the new gurgling, the owner is more at ease when he loves to drink water.No line water machine + no line water pump, free release. The body of the semi permeable frosted bottle can be seen everywhere. The three effluent modes can be used in multiple landscapes. The water capacity of the pump is up to 2L, and the water consumption of an adult animal is about 5 7 days. When the owner travels for a short time, he can drink fresh water every day. Point:1. No line pump. The water is separated to make it safer. The original line water pump is developed by ourselves, which uses the non linear magnetic induction to prolong the service life of the technology which is not easy to oxidize at the same time, so it is more convenient to clean. Three physical quarantines (pump quarantine, inner barrel quarantine, outer barrel isolation) make the water tank separate, do not lead to leakage, and the safety performance is more reliable.2. Sleep level tone. In order to reduce the noise caused by water flow, we have carefully designed 20 sound channels and added sound technology to the pump, so that the work division has been reduced to 20dBh, which is almost insensitive.3. Clear and fresh water. Modeling the gurgling water spring of the new stream, the water loop keeps the water clean for a long time, and the core is protected by high density microporous cotton and large straight coconut activated carbon raw materials, such as wool cutting, dust to chlorine, and so on.4. Large capacity of water supply. A week to drain water, a bucket to do. The water capacity of the water machine is up to 2L, which is about 5 7 days for an adult animal. When the owner travels for a short time, he can drink fresh water every day.5. Clear the dead corner. Bucket and outer bucket use separate design, the inner wall is as bright as a bowl, there is no nook and cranny, a wipe cleaning is easier.6. Environmental protection saves money. It is supplied by 5V 1A, which is as low as 1.5C a month. The design of the inner barrel is depressed, and the principle of bottom suction of the pump is used, and the remaining water is less than 200ml, which is more in line with the concept of energy environmental protection.7. It's clear.a. Anti jamming system: when the water level is too low, the pump will automatically stop working, and there will be a water shortage indicator to remind you.b. Material protection system: the outer barrel filling base supports the FOD inspection function. If there is a gold deposit, the automatic feed line water pump will be stopped, which makes it safer to use.How to use the water machine1. First, take out the inner bucket.2. Insert the outer barrel and supply it with an orchestrator.3. Take away the drains and drains from the inner bucket.4. Pour water into the inner bucket, pay attention to the water level, not higher than the Max water level line5. Wipe the water on the outer wall of the inner barrel.6. Then put the drain and outlet into the inner barrel.7. Scrub the water from the inner wall of the outer bucket8. Put the inner barrel into the outer barrel.A hint of happiness1. Water cooler cores and accessories (including inner buckets, outlet pipes, pumps, sea pipes) are recommended to be cleaned at least once per tank, and clean the water source more thoroughly, so as to avoid sinking and blocking the pump to cause water outflow and fungus breeding.2. Do not use more than 40 degrees of water washing machine or heating water machine, which can easily lead to the use of the water machine.3. Please keep the outer bucket of the water cooler dry and do not wash or soak.4. Please use the original power supply adapter to supply the water turbine, otherwise it may affect the normal operation of the water turbine.5. If you place the water cooler at the level level, the tilting may affect the normal operation of the water cooler. Feature: 1. It's really not stuck. Shape, square, triangle, whatever you want to eat, your heart is not accurate, out of order, card problems all do not exist. 2. Anti card system. a. The distribution of the new quartile is not stuck. If you divide the meal into equal portions, APP can set up more than one portion at a time, and the standard standard is about the amount of food. b. In the process of transformation, there is a slippery flow. The Gui stock plan is equipped with an ancient flexible brush to make the stock missing in an orderly manner. c. It can be upgraded to a standard, and a hard sized one can also be done. It has a full capacity and a height of 54mm. It can also serve wine with a variety of balls and shaped ice. d. External response, out of the anti blocking. The actual status of the external eye transmitter in the village ensures that the material Weir is normal. 3. It is equipped with many kinds of oils (dry, dry, expanded, dry) and dry (the maximum direct line that supports the rack is 12mm), and there is no problem with full storage. 4. 6 months without interruption. The 180 day battery has the ability to fly, so say goodbye to worry. What's better, your food dispenser will no longer be overcharged and will be distracted wherever you put it. 5.Real warranty technology. Keep cooking for 15 days, and each taste is crunchy. A. 360 °seal. In the lower style, seal the ring with three rings in order to prevent the damage. b. Pick up the drying box. Place dryness and moisture-proof once a month c. Close the outlet. Check the automatic copy bit and enter the air defense system. 6. Intelligent app scientific research to realize "intelligent scientific research" Disassembly cleaning Remove the shroud. Open the shroud first, press the buckle with your finger, and pull it out hard at the same time Take off the bucket. Move the buckle of the bucket, release the bucket, hold the bucket and take it out. Take it out. Put the bucket upside down, hold it well, and take it off with your neck open. Pay attention to cleaning. Load, host body, wipe with chili cloth, then wipe with chili cloth Install after cleaning (please remind me that the bottom should be hung for thousands before installation! ) 1. It is necessary to spin the large buckle on the standard barrel to the perfect fit for the large slot on the standard barrell. 2. Install the bucket. If you put the bucket flat on the host machine, you must buckle it. 3. Install the device. On the way, the card buckle will put the standard wine into the card slot to complete the installation. 4.Install food basins. The bowl is placed on the base of the basin, the base of the basin is fastened to the host, and the installation is completed. Method of use Open the top plate. Add half a barrel of bread App Setting Tips for reminders 1. The shipping plan needs to be configured through APP, and the number of copies and time can be set after the appliance is set. 2. In the battery mode, APP process control is not supported, and the machine will be operated according to the previously set plan. 3. The eater supports Wifi 2.4G network, but does not support Wifi 5G. Please make sure that the router supports remote segment network before checking. 4. Do not put the food dispenser in the environment of the tide, and do not let the base of the food dispenser be immersed in water. 5. It is recommended that the food dispenser be dried once a month to achieve the best drying effect. Heavy 2.01kg Barrel capacity: 4L (about 2kg) Product quality: ABS, 304mm. Fixed power: 10W Fixed input: 5V Consumer electronics: 220V Wireless connection: WiFi 2.4G Customer please read carefully the below shipping arrangement before purchase• Products shall be delivered to the customer’s provided shipping address by ETTA International Limited ("Merchant") via using a third-party logistics company. Please visit https://www.onedegree.hk/en-us/privacy-policy for more details about the policy of OneDegree Personal Information Collection Statement.• Delivery service is only available in Hong Kong (including Hong Kong Island, Kowloon, and the New Territories). An additional fee of HK$20 will apply for every floor if delivery requires going upstairs. • Delivery time may vary depending on individual merchants’ shipping schedule, generally, products shall be shipped to the customer's provided delivery address within approximately 14 working days from the issuance of the "OneDegree Pet Mart Order Confirmation Notice email" However, delivery times may be affected by traffic, adverse weather, public holidays, and other special circumstances.• If the customer provides incorrect delivery information, or if the logistics company is unable to contact the customer multiple times, or if the customer refuses delivery, resulting in the product being returned to the Merchant, Merchant may arrange re-delivery, the customer will be responsible for additional shipping costs. OneDegree shall not be held responsible.• Merchant offers a 12-month self-carry warranty service for non-human damage, starting from the issue date of "OneDegree Pet Mart Order Confirmation Notice". The warranty period will not be extended or renewed for any repaired or replaced parts or products. Customers must present the "OneDegree Pet Mart Order Confirmation Notice" issued by OneDegree via email as the proof of purchase to enjoy warranty service. If the customer fails to provide this or if the information is incomplete, Merchant will refuse to provide maintenance services. For any inquiries regarding product maintenance, please call ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm).• Customers must agree to allow OneDegree to share their contact information for Merchant to arrange delivery of products. Merchant will contact the customer before delivery to confirm arrangements. If the customer needs to change delivery details, please contact ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm).• In case of any disputes, ETTA International Limited reserves the right to make the final decision.

Introduction:&nbsp;
Homerun&nbsp;uses wireless magnetic sensors to supply technology, safe and clean; carefully designed 20 tone channel, tone low to 20dB: through triple filter, drain water source. The external equipment is equipped with the design of separation of internal and external buckets, and has intelligent functions such as anti failure system, material protection system, core alarm and so on. With the gurgling water of the new gurgling, the owner is more at ease when he loves to drink water. No line water machine + no line water pump, free release. The body of the semi permeable frosted bottle can be seen everywhere. The three effluent modes can be used in multiple landscapes. The water capacity of the pump is up to 2L, and the water consumption of an adult animal is about 5 7 days. When the owner travels for a short time, he can drink fresh water every day. Point: 1. No line pump. The water is separated to make it safer. The original line water pump is developed by ourselves, which uses the non linear magnetic induction to prolong the service life of the technology which is not easy to oxidize at the same time, so it is more convenient to clean. Three physical quarantines (pump quarantine, inner barrel quarantine, outer barrel isolation) make the water tank separate, do not lead to leakage, and the safety performance is more reliable. 2. Sleep level tone. In order to reduce the noise caused by water flow, we have carefully designed 20 sound channels and added sound technology to the pump, so that the work division has been reduced to 20dBh, which is almost insensitive. 3. Clear and fresh water. Modeling the gurgling water spring of the new stream, the water loop keeps the water clean for a long time, and the core is protected by high density microporous cotton and large straight coconut activated carbon raw materials, such as wool cutting, dust to chlorine, and so on. 4. Large capacity of water supply. A week to drain water, a bucket to do. The water capacity of the water machine is up to 2L, which is about 5 7 days for an adult animal. When the owner travels for a short time, he can drink fresh water every day. 5. Clear the dead corner. Bucket and outer bucket use separate design, the inner wall is as bright as a bowl, there is no nook and cranny, a wipe cleaning is easier. 6. Environmental protection saves money. It is supplied by 5V 1A, which is as low as 1.5C a month. The design of the inner barrel is depressed, and the principle of bottom suction of the pump is used, and the remaining water is less than 200ml, which is more in line with the concept of energy environmental protection. 7. It's clear. a. Anti jamming system: when the water level is too low, the pump will automatically stop working, and there will be a water shortage indicator to remind you. b. Material protection system: the outer barrel filling base supports the FOD inspection function. If there is a gold deposit, the automatic feed line water pump will be stopped, which makes it safer to use. How to use the water machine 1. First, take out the inner bucket. 2. Insert the outer barrel and supply it with an orchestrator. 3. Take away the drains and drains from the inner bucket. 4. Pour water into the inner bucket, pay attention to the water level, not higher than the Max water level line 5. Wipe the water on the outer wall of the inner barrel. 6. Then put the drain and outlet into the inner barrel. 7. Scrub the water from the inner wall of the outer bucket 8. Put the inner barrel into the outer barrel. A hint of happiness 1. Water cooler cores and accessories (including inner buckets, outlet pipes, pumps, sea pipes) are recommended to be cleaned at least once per tank, and clean the water source more thoroughly, so as to avoid sinking and blocking the pump to cause water outflow and fungus breeding. 2. Do not use more than 40 degrees of water washing machine or heating water machine, which can easily lead to the use of the water machine. 3. Please keep the outer bucket of the water cooler dry and do not wash or soak. 4. Please use the original power supply adapter to supply the water turbine, otherwise it may affect the normal operation of the water turbine. 5. If you place the water cooler at the level level, the tilting may affect the normal operation of the water cooler. 
Feature:
1. It's really not stuck. Shape, square, triangle, whatever you want to eat, your heart is not accurate, out of order, card problems all do not exist.
2. Anti card system.
a. The distribution of the new quartile is not stuck. If you divide the meal into equal portions, APP can set up more than one portion at a time, and the standard standard is about the amount of food.
b. In the process of transformation, there is a slippery flow. The Gui stock plan is equipped with an ancient flexible brush to make the stock missing in an orderly manner.
c. It can be upgraded to a standard, and a hard sized one can also be done. It has a full capacity and a height of 54mm. It can also serve wine with a variety of balls and shaped ice.
d. External response, out of the anti blocking. The actual status of the external eye transmitter in the village ensures that the material Weir is normal.
3. It is equipped with many kinds of oils (dry, dry, expanded, dry) and dry (the maximum direct line that supports the rack is 12mm), and there is no problem with full storage.
4. 6 months without interruption. The 180 day battery has the ability to fly, so say goodbye to worry. What's better, your food dispenser will no longer be overcharged and will be distracted wherever you put it.
5.Real warranty technology. Keep cooking for 15 days, and each taste is crunchy.
A. 360 °seal. In the lower style, seal the ring with three rings in order to prevent the damage.
b. Pick up the drying box. Place dryness and moisture-proof once a month
c. Close the outlet. Check the automatic copy bit and enter the air defense system.
6. Intelligent app scientific research to realize "intelligent scientific research"
Disassembly cleaning
<ol dir="ltr">
<li>
Remove the shroud. Open the shroud first, press the buckle with your finger, and pull it out hard at the same time
</li>
<li>
Take off the bucket. Move the buckle of the bucket, release the bucket, hold the bucket and take it out.
</li>
<li>
Take it out. Put the bucket upside down, hold it well, and take it off with your neck open.
</li>
<li>
Pay attention to cleaning. Load, host body, wipe with chili cloth, then wipe with chili cloth
</li>
</ol>
Install after cleaning (please remind me that the bottom should be hung for thousands before installation! )
1. It is necessary to spin the large buckle on the standard barrel to the perfect fit for the large slot on the standard barrell.
2. Install the bucket. If you put the bucket flat on the host machine, you must buckle it.
3. Install the device. On the way, the card buckle will put the standard wine into the card slot to complete the installation.
4.Install food basins. The bowl is placed on the base of the basin, the base of the basin is fastened to the host, and the installation is completed.
Method of use
<ol dir="ltr">
<li>
Open the top plate.
</li>
<li>
Add half a barrel of bread
</li>
<li>
App Setting
</li>
</ol>
Tips for reminders
1. The shipping plan needs to be configured through APP, and the number of copies and time can be set after the appliance is set.
2. In the battery mode, APP process control is not supported, and the machine will be operated according to the previously set plan.
3. The eater supports Wifi 2.4G network, but does not support Wifi 5G. Please make sure that the router supports remote segment network before checking.
4. Do not put the food dispenser in the environment of the tide, and do not let the base of the food dispenser be immersed in water.
5. It is recommended that the food dispenser be dried once a month to achieve the best drying effect.
Heavy 2.01kg
Barrel capacity: 4L (about 2kg)
Product quality: ABS, 304mm.
Fixed power: 10W
Fixed input: 5V
Consumer electronics: 220V
Wireless connection: WiFi 2.4G
&nbsp;
Customer please read carefully the below shipping arrangement before purchase • Products shall be delivered to the customer’s provided shipping address by ETTA International Limited ("Merchant") via using a third-party logistics company. Please visit <a href="url">https://www.onedegree.hk/en-us/privacy-policy</a> for more details about the policy of OneDegree Personal Information Collection Statement. • Delivery service is only available in Hong Kong (including Hong Kong Island, Kowloon, and the New Territories). An additional fee of HK$20 will apply for every floor if delivery requires going upstairs. • Delivery time may vary depending on individual merchants’ shipping schedule, generally, products shall be shipped to the customer's provided delivery address within approximately 14 working days from the issuance of the "OneDegree Pet Mart Order Confirmation Notice email" However, delivery times may be affected by traffic, adverse weather, public holidays, and other special circumstances. • If the customer provides incorrect delivery information, or if the logistics company is unable to contact the customer multiple times, or if the customer refuses delivery, resulting in the product being returned to the Merchant, Merchant may arrange re-delivery, the customer will be responsible for additional shipping costs. OneDegree shall not be held responsible. • Merchant offers a 12-month self-carry warranty service for non-human damage, starting from the issue date of "OneDegree Pet Mart Order Confirmation Notice". The warranty period will not be extended or renewed for any repaired or replaced parts or products. Customers must present the "OneDegree Pet Mart Order Confirmation Notice" issued by OneDegree via email as the proof of purchase to enjoy warranty service. If the customer fails to provide this or if the information is incomplete, Merchant will refuse to provide maintenance services. For any inquiries regarding product maintenance, please call ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm). • Customers must agree to allow OneDegree to share their contact information for Merchant to arrange delivery of products. Merchant will contact the customer before delivery to confirm arrangements. If the customer needs to change delivery details, please contact ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm). • In case of any disputes, ETTA International Limited reserves the right to make the final decision.

HomeRun WF20 Pet Fountain with Wireless Pump

Member Discount

Policyholder Exclusive Price

Introduction: Homerun pet dryer, great power, but also comfortable, to achieve the freedom of drying. 120m/s speed, step-by-step blow-through; 99 file speed speed, customized special speed for objects; noise as low as 43dB, people-friendly; each apocalypse, 2-2 taps, 2 main nozzles + 2 special nozzles. High-speed electronic equipment, higher performance, more durable; 2000W truck, protect material wool; speed of each file is clearly visible.Point:a.120m/s strong force, high-speed flow quickly blow away the moisture on the surface of the hair, dry the root of the hair at high speed.b. High-speed diesel, surging power, more durable: high-quality electric power, high speed up to 31000 kph / min, better performance and durability.c. 99 files are fast, fast, and even more comfortable. For each file, hairy children with different body shape, hair volume and personality can find more comfortable speed.d. Full road noise reduction design, flexible enjoy: advanced noise reduction channel + heavy muffler cotton, tone as low as 43dB.e. Smart device failure: built-in controller chip, heavy controller protection, fact test and control speed, to prevent overloadf. Tens of thousands of yakuzi, less impetuous and rattling, 2000W yawns deep into the hair, and the hair shines and softens.Training Use:01. Preparation before useInstallation tube: insert the extension tube connection into the host exit port and rotate it from time to time.Install the mouthpiece: according to the actual need, choose the suitable mouthpiece and rotate it in at once.02. Set up a websiteThe pet dryer does not connect to the power source, first use the beak to connect with the dog or fake hair on the object, every time the dog's mood is relaxed, you can use food for shopping, so that the dog is not afraid and should respond to the existence of the water blower.03. Noise sensitiveConnect the power source to the pet dryer, turn on the switch, but only let the dog sound. When using food to slowly guide him down, gradually increase the speed and noise through 99 files, and reverse this section of noise until the dog can accept the sound at high speed.04. Blow the wind and make it sensitive.Starting from a low speed, slowly move the dog to the position of his hand, chest, back and hips, and do some exercises on his hands, chest, back and hips. During this period, the dog can massage or feed the dog by hand and increase the speed step by step through 99 files, so as to establish the dog's tolerance to high speed.Hint:1. Keep away from the water source, please do not use this equipment in the tide weather, and touch or plug the power supply by hand to prevent the occurrence of accidents.2. When using this device, always place the host on a hard and flat horizontal surface to prevent the equipment from collapsing.3. When this machine is running, please do not block the exit and entrance, so as to prevent excessive failure of the computer, causing equipment failure or danger.4. Please do not leave the device when this machine is turned on. When you are out of use or when you encounter a power outage during use, please first turn the equipment on, and then unplug the plug from the socket. (make sure that the appliance is disabled)5. In the process of blowing, please check the status of the goods immediately. If the goods do not feel good, you can lower the temperature and speed. If the conditions are not good, please stop using them immediately.6. Please do not put this equipment in the place where children may get it, and do not let children play with it. Customer please read carefully the below shipping arrangement before purchase• Products shall be delivered to the customer’s provided shipping address by ETTA International Limited ("Merchant") via using a third-party logistics company. Please visit https://www.onedegree.hk/en-us/privacy-policy for more details about the policy of OneDegree Personal Information Collection Statement.• Delivery service is only available in Hong Kong (including Hong Kong Island, Kowloon, and the New Territories). An additional fee of HK$20 will apply for every floor if delivery requires going upstairs. • Delivery time may vary depending on individual merchants’ shipping schedule, generally, products shall be shipped to the customer's provided delivery address within approximately 14 working days from the issuance of the "OneDegree Pet Mart Order Confirmation Notice email" However, delivery times may be affected by traffic, adverse weather, public holidays, and other special circumstances.• If the customer provides incorrect delivery information, or if the logistics company is unable to contact the customer multiple times, or if the customer refuses delivery, resulting in the product being returned to the Merchant, Merchant may arrange re-delivery, the customer will be responsible for additional shipping costs. OneDegree shall not be held responsible.• Merchant offers a 12-month self-carry warranty service for non-human damage, starting from the issue date of "OneDegree Pet Mart Order Confirmation Notice". The warranty period will not be extended or renewed for any repaired or replaced parts or products. Customers must present the "OneDegree Pet Mart Order Confirmation Notice" issued by OneDegree via email as the proof of purchase to enjoy warranty service. If the customer fails to provide this or if the information is incomplete, Merchant will refuse to provide maintenance services. For any inquiries regarding product maintenance, please call ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm).• Customers must agree to allow OneDegree to share their contact information for Merchant to arrange delivery of products. Merchant will contact the customer before delivery to confirm arrangements. If the customer needs to change delivery details, please contact ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm).• In case of any disputes, ETTA International Limited reserves the right to make the final decision.

Introduction:&nbsp;
Homerun&nbsp;pet dryer, great power, but also comfortable, to achieve the freedom of drying. 120m/s speed, step-by-step blow-through; 99 file speed speed, customized special speed for objects; noise as low as 43dB, people-friendly; each apocalypse, 2-2 taps, 2 main nozzles + 2 special nozzles. High-speed electronic equipment, higher performance, more durable; 2000W truck, protect material wool; speed of each file is clearly visible. Point: a.120m/s strong force, high-speed flow quickly blow away the moisture on the surface of the hair, dry the root of the hair at high speed. b. High-speed diesel, surging power, more durable: high-quality electric power, high speed up to 31000 kph / min, better performance and durability. c. 99 files are fast, fast, and even more comfortable. For each file, hairy children with different body shape, hair volume and personality can find more comfortable speed. d. Full road noise reduction design, flexible enjoy: advanced noise reduction channel + heavy muffler cotton, tone as low as 43dB. e. Smart device failure: built-in controller chip, heavy controller protection, fact test and control speed, to prevent overload f. Tens of thousands of yakuzi, less impetuous and rattling, 2000W yawns deep into the hair, and the hair shines and softens. Training Use: 01. Preparation before use Installation tube: insert the extension tube connection into the host exit port and rotate it from time to time. Install the mouthpiece: according to the actual need, choose the suitable mouthpiece and rotate it in at once. 02. Set up a website The pet dryer does not connect to the power source, first use the beak to connect with the dog or fake hair on the object, every time the dog's mood is relaxed, you can use food for shopping, so that the dog is not afraid and should respond to the existence of the water blower. 03. Noise sensitive Connect the power source to the pet dryer, turn on the switch, but only let the dog sound. When using food to slowly guide him down, gradually increase the speed and noise through 99 files, and reverse this section of noise until the dog can accept the sound at high speed. 04. Blow the wind and make it sensitive. Starting from a low speed, slowly move the dog to the position of his hand, chest, back and hips, and do some exercises on his hands, chest, back and hips. During this period, the dog can massage or feed the dog by hand and increase the speed step by step through 99 files, so as to establish the dog's tolerance to high speed. Hint: 1. Keep away from the water source, please do not use this equipment in the tide weather, and touch or plug the power supply by hand to prevent the occurrence of accidents. 2. When using this device, always place the host on a hard and flat horizontal surface to prevent the equipment from collapsing. 3. When this machine is running, please do not block the exit and entrance, so as to prevent excessive failure of the computer, causing equipment failure or danger. 4. Please do not leave the device when this machine is turned on. When you are out of use or when you encounter a power outage during use, please first turn the equipment on, and then unplug the plug from the socket. (make sure that the appliance is disabled) 5. In the process of blowing, please check the status of the goods immediately. If the goods do not feel good, you can lower the temperature and speed. If the conditions are not good, please stop using them immediately. 6. Please do not put this equipment in the place where children may get it, and do not let children play with it. 
Customer please read carefully the below shipping arrangement before purchase • Products shall be delivered to the customer’s provided shipping address by ETTA International Limited ("Merchant") via using a third-party logistics company.&nbsp;Please visit <a href="url">https://www.onedegree.hk/en-us/privacy-policy</a> for more details about the policy of OneDegree Personal Information Collection Statement. • Delivery service is only available in Hong Kong (including Hong Kong Island, Kowloon, and the New Territories). An additional fee of HK$20 will apply for every floor if delivery requires going upstairs. • Delivery time may vary depending on individual merchants’ shipping schedule, generally, products shall be shipped to the customer's provided delivery address within approximately 14 working days from the issuance of the "OneDegree Pet Mart Order Confirmation Notice email" However, delivery times may be affected by traffic, adverse weather, public holidays, and other special circumstances. • If the customer provides incorrect delivery information, or if the logistics company is unable to contact the customer multiple times, or if the customer refuses delivery, resulting in the product being returned to the Merchant, Merchant may arrange re-delivery, the customer will be responsible for additional shipping costs. OneDegree shall not be held responsible. • Merchant offers a 12-month self-carry warranty service for non-human damage, starting from the issue date of "OneDegree Pet Mart Order Confirmation Notice". The warranty period will not be extended or renewed for any repaired or replaced parts or products. Customers must present the "OneDegree Pet Mart Order Confirmation Notice" issued by OneDegree via email as the proof of purchase to enjoy warranty service. If the customer fails to provide this or if the information is incomplete, Merchant will refuse to provide maintenance services. For any inquiries regarding product maintenance, please call ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm). • Customers must agree to allow OneDegree to share their contact information for Merchant to arrange delivery of products. Merchant will contact the customer before delivery to confirm arrangements. If the customer needs to change delivery details, please contact ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm). • In case of any disputes, ETTA International Limited reserves the right to make the final decision.

HomeRun PD10 Pet Hair Dryer

Introduction: CF20 uses no line magnetic induction technology for supply, safe and clean; on the basis of water retention separation, deep UV bacteria technology is added, the coverage rate is strong, and all harmful microorganisms such as macrocephalus, infectious hepatitis, nucleation bacteria and other harmful microorganisms in high efficient water cut off 2mins are removed every time, and every drop is contaminated. The design of the separation of internal and external buckets on the outside, and the gurgling water with new intelligent function models such as anti tank system, special protection system, core reminder, etc., the owner is more at ease when the food loves to drink water.The water pump is supplied with no line magnetic induction, 3 times physical isolation, the safety capacity is increased by 100%, the traditional water pump is not easy to oxidize, the life is longer, and the water pump is offline, so it is more convenient to clean.The water capacity of the water machine is up to 2L, which is about 5 7 days for an adult animal. When the owner travels for a short time, he can drink fresh water every day.Ceramic bowl designFeature:1. The pump is upgraded and the sterilization rate is 99%. The high power UVC LED in the pump periodically emits ultraviolet light, which can not only cause the death of bacteria, but also reduce the production of biofilm, achieve long term bacteriostatic effect, and further improve the quality of water.* according to data from Weizhou Institute of Microbiology, sterilization refers to Macrophora, Staphylococcus aureus, Salmonella. Sterilization test signal: 2022FM19397R01D2. Upgraded ceramic powder: under the action of smooth ceramic glaze and water flow, the way of removing water can quickly remove surface hair, crumbs and food residue.3. Sound the progress of science and technology. Not only can it attract goods, but also can beat the water, so that the distribution of work can be reduced to 20dB free and interest free.4. Large capacity of water supply. A week to drain water, a bucket to do. The water capacity of the water machine is up to 2L, which is about 5 7 days for an adult animal. When the owner travels for a short time, he can drink fresh water every day.5. Clear the dead corner. Bucket and outer bucket use separate design, the inner wall is as bright as a bowl, there is no nook and cranny, a wipe cleaning is easier.6. Environmental protection saves money. It is supplied by 5V 1A, which is as low as 1.5C a month. The design of the inner barrel is depressed, and the principle of bottom suction of the pump is used, and the remaining water is less than 200ml, which is more in line with the concept of energy environmental protection.7. It's clear.a. Anti jamming system: when the water level is too low, the pump will automatically stop working, and there will be a water shortage indicator to remind you.b. Material protection system: the outer barrel filling base supports the FOD inspection function. If there is a gold deposit, the automatic feed line water pump will be stopped, which makes it safer to use.How to use the water cooler1. First, take out the inner bucket.2. Insert the outer barrel and supply it with an orchestrator.3. Take away the drains and drains from the inner bucket.4. Pour water into the inner bucket, pay attention to the water level, not higher than the Max water level line5. Wipe the water on the outer wall of the inner barrel.6. Then put the drain and outlet into the inner barrel.7. Scrub the water from the inner wall of the outer bucket8. Put the inner barrel into the outer barrel. Tips for reminders1. Water cooler cores and accessories (including inner buckets, outlet pipes, pumps, sea pipes) are recommended to be cleaned at least once per tank, and clean the water source more thoroughly, so as to avoid sinking and blocking the pump to cause water outflow and fungus breeding.2. Do not use more than 40 degrees of water washing machine or heating water machine, which can easily lead to the use of the water machine.3. Please keep the outer bucket of the water cooler dry and do not wash or soak.4. Please use the original power supply adapter to supply the water turbine, otherwise it may affect the normal operation of the water turbine.5. If you place the water cooler at the level level, the tilting may affect the normal operation of the water cooler.6. when filling the water machine, please keep the amount of water below the maximum scale line and above the minimum scale line. Customer please read carefully the below shipping arrangement before purchase• Products shall be delivered to the customer’s provided shipping address by ETTA International Limited ("Merchant") via using a third-party logistics company. Please visit https://www.onedegree.hk/en-us/privacy-policy for more details about the policy of OneDegree Personal Information Collection Statement.• Delivery service is only available in Hong Kong (including Hong Kong Island, Kowloon, and the New Territories). An additional fee of HK$20 will apply for every floor if delivery requires going upstairs. • Delivery time may vary depending on individual merchants’ shipping schedule, generally, products shall be shipped to the customer's provided delivery address within approximately 14 working days from the issuance of the "OneDegree Pet Mart Order Confirmation Notice email" However, delivery times may be affected by traffic, adverse weather, public holidays, and other special circumstances.• If the customer provides incorrect delivery information, or if the logistics company is unable to contact the customer multiple times, or if the customer refuses delivery, resulting in the product being returned to the Merchant, Merchant may arrange re-delivery, the customer will be responsible for additional shipping costs. OneDegree shall not be held responsible.• Merchant offers a 12-month self-carry warranty service for non-human damage, starting from the issue date of "OneDegree Pet Mart Order Confirmation Notice". The warranty period will not be extended or renewed for any repaired or replaced parts or products. Customers must present the "OneDegree Pet Mart Order Confirmation Notice" issued by OneDegree via email as the proof of purchase to enjoy warranty service. If the customer fails to provide this or if the information is incomplete, Merchant will refuse to provide maintenance services. For any inquiries regarding product maintenance, please call ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm).• Customers must agree to allow OneDegree to share their contact information for Merchant to arrange delivery of products. Merchant will contact the customer before delivery to confirm arrangements. If the customer needs to change delivery details, please contact ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm).• In case of any disputes, ETTA International Limited reserves the right to make the final decision.

Introduction:&nbsp;
CF20 uses no line magnetic induction technology for supply, safe and clean; on the basis of water retention separation, deep UV bacteria technology is added, the coverage rate is strong, and all harmful microorganisms such as macrocephalus, infectious hepatitis, nucleation bacteria and other harmful microorganisms in high efficient water cut off 2mins are removed every time, and every drop is contaminated. The design of the separation of internal and external buckets on the outside, and the gurgling water with new intelligent function models such as anti tank system, special protection system, core reminder, etc., the owner is more at ease when the food loves to drink water. The water pump is supplied with no line magnetic induction, 3 times physical isolation, the safety capacity is increased by 100%, the traditional water pump is not easy to oxidize, the life is longer, and the water pump is offline, so it is more convenient to clean. The water capacity of the water machine is up to 2L, which is about 5 7 days for an adult animal. When the owner travels for a short time, he can drink fresh water every day. Ceramic bowl design Feature: 1. The pump is upgraded and the sterilization rate is 99%. The high power UVC LED in the pump periodically emits ultraviolet light, which can not only cause the death of bacteria, but also reduce the production of biofilm, achieve long term bacteriostatic effect, and further improve the quality of water. * according to data from Weizhou Institute of Microbiology, sterilization refers to Macrophora, Staphylococcus aureus, Salmonella. Sterilization test signal: 2022FM19397R01D 2. Upgraded ceramic powder: under the action of smooth ceramic glaze and water flow, the way of removing water can quickly remove surface hair, crumbs and food residue. 3. Sound the progress of science and technology. Not only can it attract goods, but also can beat the water, so that the distribution of work can be reduced to 20dB free and interest free. 4. Large capacity of water supply. A week to drain water, a bucket to do. The water capacity of the water machine is up to 2L, which is about 5 7 days for an adult animal. When the owner travels for a short time, he can drink fresh water every day. 5. Clear the dead corner. Bucket and outer bucket use separate design, the inner wall is as bright as a bowl, there is no nook and cranny, a wipe cleaning is easier. 6. Environmental protection saves money. It is supplied by 5V 1A, which is as low as 1.5C a month. The design of the inner barrel is depressed, and the principle of bottom suction of the pump is used, and the remaining water is less than 200ml, which is more in line with the concept of energy environmental protection. 7. It's clear. a. Anti jamming system: when the water level is too low, the pump will automatically stop working, and there will be a water shortage indicator to remind you. b. Material protection system: the outer barrel filling base supports the FOD inspection function. If there is a gold deposit, the automatic feed line water pump will be stopped, which makes it safer to use. How to use the water cooler 1. First, take out the inner bucket. 2. Insert the outer barrel and supply it with an orchestrator. 3. Take away the drains and drains from the inner bucket. 4. Pour water into the inner bucket, pay attention to the water level, not higher than the Max water level line 5. Wipe the water on the outer wall of the inner barrel. 6. Then put the drain and outlet into the inner barrel. 7. Scrub the water from the inner wall of the outer bucket 8. Put the inner barrel into the outer barrel. Tips for reminders 1. Water cooler cores and accessories (including inner buckets, outlet pipes, pumps, sea pipes) are recommended to be cleaned at least once per tank, and clean the water source more thoroughly, so as to avoid sinking and blocking the pump to cause water outflow and fungus breeding. 2. Do not use more than 40 degrees of water washing machine or heating water machine, which can easily lead to the use of the water machine. 3. Please keep the outer bucket of the water cooler dry and do not wash or soak. 4. Please use the original power supply adapter to supply the water turbine, otherwise it may affect the normal operation of the water turbine. 5. If you place the water cooler at the level level, the tilting may affect the normal operation of the water cooler. 6. when filling the water machine, please keep the amount of water below the maximum scale line and above the minimum scale line.
Customer please read carefully the below shipping arrangement before purchase • Products shall be delivered to the customer’s provided shipping address by ETTA International Limited ("Merchant") via using a third-party logistics company. Please visit <a href="url">https://www.onedegree.hk/en-us/privacy-policy</a> for more details about the policy of OneDegree Personal Information Collection Statement. • Delivery service is only available in Hong Kong (including Hong Kong Island, Kowloon, and the New Territories). An additional fee of HK$20 will apply for every floor if delivery requires going upstairs. • Delivery time may vary depending on individual merchants’ shipping schedule, generally, products shall be shipped to the customer's provided delivery address within approximately 14 working days from the issuance of the "OneDegree Pet Mart Order Confirmation Notice email" However, delivery times may be affected by traffic, adverse weather, public holidays, and other special circumstances. • If the customer provides incorrect delivery information, or if the logistics company is unable to contact the customer multiple times, or if the customer refuses delivery, resulting in the product being returned to the Merchant, Merchant may arrange re-delivery, the customer will be responsible for additional shipping costs. OneDegree shall not be held responsible. • Merchant offers a 12-month self-carry warranty service for non-human damage, starting from the issue date of "OneDegree Pet Mart Order Confirmation Notice". The warranty period will not be extended or renewed for any repaired or replaced parts or products. Customers must present the "OneDegree Pet Mart Order Confirmation Notice" issued by OneDegree via email as the proof of purchase to enjoy warranty service. If the customer fails to provide this or if the information is incomplete, Merchant will refuse to provide maintenance services. For any inquiries regarding product maintenance, please call ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm). • Customers must agree to allow OneDegree to share their contact information for Merchant to arrange delivery of products. Merchant will contact the customer before delivery to confirm arrangements. If the customer needs to change delivery details, please contact ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm). • In case of any disputes, ETTA International Limited reserves the right to make the final decision.

HomeRun CF20 Pet Fountain with Porcelain Plate + Wireless UVC Pump

The PD135 dryer features an innovative breathable fence design and utilizes an Archimedes spiral air duct to reduce wind resistance while increasing air intake. This design allows for faster drying by providing uniform airflow from the bottom to the back. The dryer is equipped with a high-precision sensor and overheating protection components to ensure the safety of pets. With a large space of 135 liters, it can accommodate pets in various sleeping positions, enhancing the interaction between humans and pets during the drying process. The dryer also offers a quick drying time of 30 minutes and operates with a low sound level of only 34 dB, ensuring a peaceful environment for both pets and owners. Additionally, it can be used as a cat kennel or small dog kennel. Key Features: Fresh Air System: The PD135 dryer ensures good air quality inside the box with a high air exchange capacity of 1620 L/min, providing pets with fresh air. The air changes 12 times per minute, promoting better respiratory health. Adjustable Temperature: The dryer features a smart temperature control system that allows you to adjust the temperature from 16°C to 40°C. It maintains a constant temperature with precise temperature control technology, ensuring stability within a fluctuation range of only ±1°C. The box has four sets of NTC temperature sensors for accurate temperature detection and two sets of PTC heating technology that can raise the temperature by 20°C in just 2 minutes. Thorough Drying: The dryer is designed to eliminate dead spots, ensuring that all areas are dried and cooled evenly. The bottom air supply design is particularly suitable for pets lying on their stomachs, effectively drying difficult-to-reach areas like the belly and feet. Extra Space: With a spacious interior, the PD135 dryer can accommodate pets in various positions. The 135-liter-sized space is sufficient to meet the needs of different pet families. Innovative Breathable Fence: The removable grid mesh cover enhances air circulation, allowing for a larger area of airflow and improved ventilation. Instructions: Routine Operation:a. Press and hold the power button to turn on the dryer.b. Slide the button to unlock the device. The key indicator will light up.c. Slide the button again to lock the device. Only the power and lock buttons will remain illuminated.d. Press the power button to adjust the light brightness.e. Hold down the power button to turn off the indicator. Setting the Drying Mode:a. Press the Mode button to switch between comfortable drying and quick drying modes.b. Press the Set button to enter temperature setting. Use the Increase or Decrease buttons to adjust the temperature.c. Press the Set button again to enter time setting. Use the Increase or Decrease buttons to adjust the working time.d. Press the Set button once more to enter wind speed setting. Use the Increase or Decrease buttons to adjust the wind speed.e. Once the settings are complete, press the Start/Stop button to start the drying process. Note: During the drying process, the wind speed can be adjusted at any time using the Increase or Decrease buttons. After setting the parameters, the drying mode can be directly started by pressing the Start button in subsequent uses. Winter Warm Cat Nest Mode: Note: Remove the window before using this mode.a. Press the Mode button to switch to Winter Warm Cat Nest mode.b. Press the Set button to enter temperature setting. Use the Increase or Decrease buttons to adjust the temperature.c. Press the Set button again to enter wind speed setting. Use the Increase or Decrease buttons to adjust the wind speed.d. Once the settings are complete, press the Start/Stop button to start the operation. Note: During operation, the wind speed can be adjusted at any time using the Increase or Decrease buttons. After setting the parameters, the Winter Warm Cat Nest mode can be directly started by pressing the Start button in subsequent uses. Summer Cooling Cat Nest Mode: Note: Remove the window before using this mode.a. Press the Mode button to switch to Summer Cooling Cat Nest mode.b. Press the Set button to enter wind speed setting. Use the Increase or Decrease buttons to adjust the wind speed. Note: During operation, the wind speed can be adjusted at any time using the Increase or Decrease buttons. Sterilization Mode: Note: Install the sterilization window and close the door before using this mode. Do not allow pets to enter the dryer during sterilization.a. Press the Mode button to switch to the quick drying mode.b. Press and hold the Lock and Mode buttons again to enter the sterilization and clean flavor mode.c. Press the Start/Stop button to start the system. Note: To prevent accidental activation, the operation is slightly more complicated. After 30minutes of sterilization, the system will automatically turn off. Maintenance and Cleaning: Regularly clean the filter to ensure proper airflow and prevent clogging. Remove the filter from the bottom of the dryer, clean it with water, and let it dry before reinserting. Clean the interior and exterior of the dryer with a soft cloth and mild detergent when necessary. Avoid using harsh chemicals or abrasive materials that may damage the surface. Avoid direct water contact with the control panel and power socket to prevent electrical damage. Check the power cord periodically for any signs of damage. If any damage is found, stop using the dryer and contact customer service for assistance. Store the dryer in a cool and dry place when not in use to prolong its lifespan. Safety Precautions: Do not operate the dryer without the breathable fence cover. Do not place any foreign objects or pets on top of the dryer to avoid damage or injury. Keep the dryer away from flammable materials and liquids. Do not disassemble or modify the dryer yourself. Contact customer service for any repairs or maintenance needs. Do not leave pets unattended while using the dryer. If any abnormal noise, smell, or malfunction occurs, stop using the dryer immediately and contact customer service for assistance. Unit Dimensions (W × H × D): 610 × 680 × 660 mm Package Weight: 26 kg Package Dimensions (W × H × D): 610 × 680 × 660 mm

The PD135 dryer features an innovative breathable fence design and utilizes an Archimedes spiral air duct to reduce wind resistance while increasing air intake. This design allows for faster drying by providing uniform airflow from the bottom to the back. The dryer is equipped with a high-precision sensor and overheating protection components to ensure the safety of pets. With a large space of 135 liters, it can accommodate pets in various sleeping positions, enhancing the interaction between humans and pets during the drying process. The dryer also offers a quick drying time of 30 minutes and operates with a low sound level of only 34 dB, ensuring a peaceful environment for both pets and owners. Additionally, it can be used as a cat kennel or small dog kennel.
<h2>Key Features:</h2>
<ul>
<li>Fresh Air System: The PD135 dryer ensures good air quality inside the box with a high air exchange capacity of 1620 L/min, providing pets with fresh air. The air changes 12 times per minute, promoting better respiratory health.</li>
<li>Adjustable Temperature: The dryer features a smart temperature control system that allows you to adjust the temperature from 16&deg;C to 40&deg;C. It maintains a constant temperature with precise temperature control technology, ensuring stability within a fluctuation range of only &plusmn;1&deg;C. The box has four sets of NTC temperature sensors for accurate temperature detection and two sets of PTC heating technology that can raise the temperature by 20&deg;C in just 2 minutes.</li>
<li>Thorough Drying: The dryer is designed to eliminate dead spots, ensuring that all areas are dried and cooled evenly. The bottom air supply design is particularly suitable for pets lying on their stomachs, effectively drying difficult-to-reach areas like the belly and feet.</li>
<li>Extra Space: With a spacious interior, the PD135 dryer can accommodate pets in various positions. The 135-liter-sized space is sufficient to meet the needs of different pet families.</li>
<li>Innovative Breathable Fence: The removable grid mesh cover enhances air circulation, allowing for a larger area of airflow and improved ventilation.</li>
</ul>
<h2>Instructions:</h2>
<ol>
<li>
Routine Operation: a. Press and hold the power button to turn on the dryer. b. Slide the button to unlock the device. The key indicator will light up. c. Slide the button again to lock the device. Only the power and lock buttons will remain illuminated. d. Press the power button to adjust the light brightness. e. Hold down the power button to turn off the indicator.
</li>
<li>
Setting the Drying Mode: a. Press the Mode button to switch between comfortable drying and quick drying modes. b. Press the Set button to enter temperature setting. Use the Increase or Decrease buttons to adjust the temperature. c. Press the Set button again to enter time setting. Use the Increase or Decrease buttons to adjust the working time. d. Press the Set button once more to enter wind speed setting. Use the Increase or Decrease buttons to adjust the wind speed. e. Once the settings are complete, press the Start/Stop button to start the drying process.
<ul>
<li>Note: During the drying process, the wind speed can be adjusted at any time using the Increase or Decrease buttons. After setting the parameters, the drying mode can be directly started by pressing the Start button in subsequent uses.</li>
</ul>
</li>
<li>
Winter Warm Cat Nest Mode:
<ul>
<li>Note: Remove the window before using this mode. a. Press the Mode button to switch to Winter Warm Cat Nest mode. b. Press the Set button to enter temperature setting. Use the Increase or Decrease buttons to adjust the temperature. c. Press the Set button again to enter wind speed setting. Use the Increase or Decrease buttons to adjust the wind speed. d. Once the settings are complete, press the Start/Stop button to start the operation.</li>
<li>Note: During operation, the wind speed can be adjusted at any time using the Increase or Decrease buttons. After setting the parameters, the Winter Warm Cat Nest mode can be directly started by pressing the Start button in subsequent uses.</li>
</ul>
</li>
<li>
Summer Cooling Cat Nest Mode:
<ul>
<li>Note: Remove the window before using this mode. a. Press the Mode button to switch to Summer Cooling Cat Nest mode. b. Press the Set button to enter wind speed setting. Use the Increase or Decrease buttons to adjust the wind speed.</li>
<li>Note: During operation, the wind speed can be adjusted at any time using the Increase or Decrease buttons.</li>
</ul>
</li>
<li>
Sterilization Mode:
<ul>
<li>Note: Install the sterilization window and close the door before using this mode. Do not allow pets to enter the dryer during sterilization. a. Press the Mode button to switch to the quick drying mode. b. Press and hold the Lock and Mode buttons again to enter the sterilization and clean flavor mode. c. Press the Start/Stop button to start the system.</li>
<li>Note: To prevent accidental activation, the operation is slightly more complicated. After 30minutes of sterilization, the system will automatically turn off.</li>
</ul>
</li>
</ol>
<h2>Maintenance and Cleaning:</h2>
<ul>
<li>Regularly clean the filter to ensure proper airflow and prevent clogging. Remove the filter from the bottom of the dryer, clean it with water, and let it dry before reinserting.</li>
<li>Clean the interior and exterior of the dryer with a soft cloth and mild detergent when necessary. Avoid using harsh chemicals or abrasive materials that may damage the surface.</li>
<li>Avoid direct water contact with the control panel and power socket to prevent electrical damage.</li>
<li>Check the power cord periodically for any signs of damage. If any damage is found, stop using the dryer and contact customer service for assistance.</li>
<li>Store the dryer in a cool and dry place when not in use to prolong its lifespan.</li>
</ul>
<h2>Safety Precautions:</h2>
<ul>
<li>Do not operate the dryer without the breathable fence cover.</li>
<li>Do not place any foreign objects or pets on top of the dryer to avoid damage or injury.</li>
<li>Keep the dryer away from flammable materials and liquids.</li>
<li>Do not disassemble or modify the dryer yourself. Contact customer service for any repairs or maintenance needs.</li>
<li>Do not leave pets unattended while using the dryer.</li>
<li>If any abnormal noise, smell, or malfunction occurs, stop using the dryer immediately and contact customer service for assistance.</li>
</ul>
Unit Dimensions (W &times; H &times; D): 610 &times; 680 &times; 660 mm
Package Weight: 26 kg
Package Dimensions (W &times; H &times; D): 610 &times; 680 &times; 660 mm

Homerun Pet Hair Dryer Ultra PD135

保險客戶專享價

Homerun HC15 the Grooming Kit is a pet vacuuming set that integrates all functions of combing, shaving, thinning, detangling, suctioning and massaging into one. It has 6 replaceable heads that can cover the needs of pet owners in all scenarios. It has a suction power of up to 12000Pa and can absorb 96.75% of dust as small as 0.3 microns. With the low-noise level design, as low as 50dB(A), your pet will not be frightened. Moreover, it uses a spiral cyclone to efficiently separate dust and dirt, and the 1.85L extra-large dust cup can accommodate more hair and debris. With this grooming set, pet owners can easily solve the problem of taking care of pet hair. Unit Dimensions (W × H × D): 160 × 219 × 342 mm Package Weight: 4.95 kg Package Dimensions (W × H × D): 330 × 190 × 438 mm

Homerun HC15 the Grooming Kit is a pet vacuuming set that integrates all functions of combing, shaving, thinning, detangling, suctioning and massaging into one. It has 6 replaceable heads that can cover the needs of pet owners in all scenarios. It has a suction power of up to 12000Pa and can absorb 96.75% of dust as small as 0.3 microns. With the low-noise level design, as low as 50dB(A), your pet will not be frightened. Moreover, it uses a spiral cyclone to efficiently separate dust and dirt, and the 1.85L extra-large dust cup can accommodate more hair and debris. With this grooming set, pet owners can easily solve the problem of taking care of pet hair.
Unit Dimensions (W &times; H &times; D): 160 &times; 219 &times; 342 mm
Package Weight: 4.95 kg
Package Dimensions (W &times; H &times; D): 330 &times; 190 &times; 438 mm

Homerun The Grooming Kit HC15

Introduction: fixed time quantitative, scientific feed, really not jammed, 6 months do not plug in, do not wait for a while, 10 seconds to unpack and wash. Feature: 1. It's really not stuck. Shape, square, triangle, whatever you want to eat, your heart is not accurate, out of order, card problems all do not exist. 2. Anti card system. a. The distribution of the new quartile is not stuck. If you divide the meal into equal portions, APP can set up more than one portion at a time, and the standard standard is about the amount of food. b. In the process of transformation, there is a slippery flow. The Gui stock plan is equipped with an ancient flexible brush to make the stock missing in an orderly manner. c. It can be upgraded to a standard, and a hard sized one can also be done. It has a full capacity and a height of 54mm. It can also serve wine with a variety of balls and shaped ice. d. External response, out of the anti blocking. The actual status of the external eye transmitter in the village ensures that the material Weir is normal. 3. It is equipped with many kinds of oils (dry, dry, expanded, dry) and dry (the maximum direct line that supports the rack is 12mm), and there is no problem with full storage. 4. 6 months without interruption. The 180 day battery has the ability to fly, so say goodbye to worry. What's better, your food dispenser will no longer be overcharged and will be distracted wherever you put it. 5.Real warranty technology. Keep cooking for 15 days, and each taste is crunchy. A. 360 °seal. In the lower style, seal the ring with three rings in order to prevent the damage. b. Pick up the drying box. Place dryness and moisture-proof once a month c. Close the outlet. Check the automatic copy bit and enter the air defense system. 6. Intelligent app scientific research to realize "intelligent scientific research" Disassembly cleaning Remove the shroud. Open the shroud first, press the buckle with your finger, and pull it out hard at the same time Take off the bucket. Move the buckle of the bucket, release the bucket, hold the bucket and take it out. Take it out. Put the bucket upside down, hold it well, and take it off with your neck open. Pay attention to cleaning. Load, host body, wipe with chili cloth, then wipe with chili cloth Install after cleaning (please remind me that the bottom should be hung for thousands before installation! ) 1. It is necessary to spin the large buckle on the standard barrel to the perfect fit for the large slot on the standard barrell. 2. Install the bucket. If you put the bucket flat on the host machine, you must buckle it. 3. Install the device. On the way, the card buckle will put the standard wine into the card slot to complete the installation. 4.Install food basins. The bowl is placed on the base of the basin, the base of the basin is fastened to the host, and the installation is completed. Method of use Open the top plate. Add half a barrel of bread App Setting Tips for reminders 1. The shipping plan needs to be configured through APP, and the number of copies and time can be set after the appliance is set. 2. In the battery mode, APP process control is not supported, and the machine will be operated according to the previously set plan. 3. The eater supports Wifi 2.4G network, but does not support Wifi 5G. Please make sure that the router supports remote segment network before checking. 4. Do not put the food dispenser in the environment of the tide, and do not let the base of the food dispenser be immersed in water. 5. It is recommended that the food dispenser be dried once a month to achieve the best drying effect. Heavy 2.01kg Barrel capacity: 4L (about 2kg) Product quality: ABS, 304mm. Fixed power: 10W Fixed input: 5V Consumer electronics: 220V Wireless connection: WiFi 2.4G Customer please read carefully the below shipping arrangement before purchase Products shall be delivered to the customer’s provided shipping address by ETTA International Limited ("Merchant") via using a third-party logistics company. Please visit https://www.onedegree.hk/en-us/privacy-policy for more details about the policy of OneDegree Personal Information Collection Statement. Delivery service is only available in Hong Kong (including Hong Kong Island, Kowloon, and the New Territories). An additional fee of HK$20 will apply for every floor if delivery requires going upstairs. Delivery time may vary depending on individual merchants’ shipping schedule, generally, products shall be shipped to the customer's provided delivery address within approximately 14 working days from the issuance of the "OneDegree Pet Mart Order Confirmation Notice email" However, delivery times may be affected by traffic, adverse weather, public holidays, and other special circumstances. If the customer provides incorrect delivery information, or if the logistics company is unable to contact the customer multiple times, or if the customer refuses delivery, resulting in the product being returned to the Merchant, Merchant may arrange re-delivery, the customer will be responsible for additional shipping costs. OneDegree shall not be held responsible. Merchant offers a 12-month self-carry warranty service for non-human damage, starting from the issue date of "OneDegree Pet Mart Order Confirmation Notice". The warranty period will not be extended or renewed for any repaired or replaced parts or products. Customers must present the "OneDegree Pet Mart Order Confirmation Notice" issued by OneDegree via email as the proof of purchase to enjoy warranty service. If the customer fails to provide this or if the information is incomplete, Merchant will refuse to provide maintenance services. For any inquiries regarding product maintenance, please call ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm). Customers must agree to allow OneDegree to share their contact information for Merchant to arrange delivery of products. Merchant will contact the customer before delivery to confirm arrangements. If the customer needs to change delivery details, please contact ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm). In case of any disputes, ETTA International Limited reserves the right to make the final decision.

Introduction:&nbsp;
fixed time quantitative, scientific feed, really not jammed, 6 months do not plug in, do not wait for a while, 10 seconds to unpack and wash.
Feature:
1. It's really not stuck. Shape, square, triangle, whatever you want to eat, your heart is not accurate, out of order, card problems all do not exist.
2. Anti card system.
a. The distribution of the new quartile is not stuck. If you divide the meal into equal portions, APP can set up more than one portion at a time, and the standard standard is about the amount of food.
b. In the process of transformation, there is a slippery flow. The Gui stock plan is equipped with an ancient flexible brush to make the stock missing in an orderly manner.
c. It can be upgraded to a standard, and a hard sized one can also be done. It has a full capacity and a height of 54mm. It can also serve wine with a variety of balls and shaped ice.
d. External response, out of the anti blocking. The actual status of the external eye transmitter in the village ensures that the material Weir is normal.
3. It is equipped with many kinds of oils (dry, dry, expanded, dry) and dry (the maximum direct line that supports the rack is 12mm), and there is no problem with full storage.
4. 6 months without interruption. The 180 day battery has the ability to fly, so say goodbye to worry. What's better, your food dispenser will no longer be overcharged and will be distracted wherever you put it.
5.Real warranty technology. Keep cooking for 15 days, and each taste is crunchy.
A. 360 °seal. In the lower style, seal the ring with three rings in order to prevent the damage.
b. Pick up the drying box. Place dryness and moisture-proof once a month
c. Close the outlet. Check the automatic copy bit and enter the air defense system.
6. Intelligent app scientific research to realize "intelligent scientific research"
Disassembly cleaning
<ol dir="ltr">
<li>
Remove the shroud. Open the shroud first, press the buckle with your finger, and pull it out hard at the same time
</li>
<li>
Take off the bucket. Move the buckle of the bucket, release the bucket, hold the bucket and take it out.
</li>
<li>
Take it out. Put the bucket upside down, hold it well, and take it off with your neck open.
</li>
<li>
Pay attention to cleaning. Load, host body, wipe with chili cloth, then wipe with chili cloth
</li>
</ol>
Install after cleaning (please remind me that the bottom should be hung for thousands before installation! )
1. It is necessary to spin the large buckle on the standard barrel to the perfect fit for the large slot on the standard barrell.
2. Install the bucket. If you put the bucket flat on the host machine, you must buckle it.
3. Install the device. On the way, the card buckle will put the standard wine into the card slot to complete the installation.
4.Install food basins. The bowl is placed on the base of the basin, the base of the basin is fastened to the host, and the installation is completed.
Method of use
<ol dir="ltr">
<li>
Open the top plate.
</li>
<li>
Add half a barrel of bread
</li>
<li>
App Setting
</li>
</ol>
Tips for reminders
1. The shipping plan needs to be configured through APP, and the number of copies and time can be set after the appliance is set.
2. In the battery mode, APP process control is not supported, and the machine will be operated according to the previously set plan.
3. The eater supports Wifi 2.4G network, but does not support Wifi 5G. Please make sure that the router supports remote segment network before checking.
4. Do not put the food dispenser in the environment of the tide, and do not let the base of the food dispenser be immersed in water.
5. It is recommended that the food dispenser be dried once a month to achieve the best drying effect.
Heavy 2.01kg
Barrel capacity: 4L (about 2kg)
Product quality: ABS, 304mm.
Fixed power: 10W
Fixed input: 5V
Consumer electronics: 220V
Wireless connection: WiFi 2.4G
&nbsp;&nbsp;
Customer please read carefully the below shipping arrangement before purchase
<ul>
<li>Products shall be delivered to the customer’s provided shipping address by ETTA International Limited ("Merchant") via using a third-party logistics company. Please visit <a href="url">https://www.onedegree.hk/en-us/privacy-policy</a> for more details about the policy of OneDegree Personal Information Collection Statement.</li>
<li>Delivery service is only available in Hong Kong (including Hong Kong Island, Kowloon, and the New Territories). An additional fee of HK$20 will apply for every floor if delivery requires going upstairs.</li>
<li>Delivery time may vary depending on individual merchants’ shipping schedule, generally, products shall be shipped to the customer's provided delivery address within approximately 14 working days from the issuance of the "OneDegree Pet Mart Order Confirmation Notice email" However, delivery times may be affected by traffic, adverse weather, public holidays, and other special circumstances.</li>
<li>If the customer provides incorrect delivery information, or if the logistics company is unable to contact the customer multiple times, or if the customer refuses delivery, resulting in the product being returned to the Merchant, Merchant may arrange re-delivery, the customer will be responsible for additional shipping costs. OneDegree shall not be held responsible.</li>
<li>Merchant offers a 12-month self-carry warranty service for non-human damage, starting from the issue date of "OneDegree Pet Mart Order Confirmation Notice". The warranty period will not be extended or renewed for any repaired or replaced parts or products. Customers must present the "OneDegree Pet Mart Order Confirmation Notice" issued by OneDegree via email as the proof of purchase to enjoy warranty service. If the customer fails to provide this or if the information is incomplete, Merchant will refuse to provide maintenance services. For any inquiries regarding product maintenance, please call ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm).</li>
<li>Customers must agree to allow OneDegree to share their contact information for Merchant to arrange delivery of products. Merchant will contact the customer before delivery to confirm arrangements. If the customer needs to change delivery details, please contact ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm).</li>
<li>In case of any disputes, ETTA International Limited reserves the right to make the final decision.</li>
</ul>

Homerun PF20 Mobile APP control Stainless Steel bowl Pet Feeder

Introduction: fixed time quantitative, scientific feed, really not jammed, 6 months do not plug in, do not wait for a while, 10 seconds to unpack and wash.
Feature:
1. It's really not stuck. Shape, square, triangle, whatever you want to eat, your heart is not accurate, out of order, card problems all do not exist.
2. Anti card system.
a. The distribution of the new quartile is not stuck. If you divide the meal into equal portions, APP can set up more than one portion at a time, and the standard standard is about the amount of food.
b. In the process of transformation, there is a slippery flow. The Gui stock plan is equipped with an ancient flexible brush to make the stock missing in an orderly manner.
c. It can be upgraded to a standard, and a hard sized one can also be done. It has a full capacity and a height of 54mm. It can also serve wine with a variety of balls and shaped ice.
d. External response, out of the anti blocking. The actual status of the external eye transmitter in the village ensures that the material Weir is normal.
3. It is equipped with many kinds of oils (dry, dry, expanded, dry) and dry (the maximum direct line that supports the rack is 12mm), and there is no problem with full storage.
4. 6 months without interruption. The 180 day battery has the ability to fly, so say goodbye to worry. What's better, your food dispenser will no longer be overcharged and will be distracted wherever you put it.
5.Real warranty technology. Keep cooking for 15 days, and each taste is crunchy.
A. 360 °seal. In the lower style, seal the ring with three rings in order to prevent the damage.
b. Pick up the drying box. Place dryness and moisture-proof once a month
c. Close the outlet. Check the automatic copy bit and enter the air defense system.
6. Intelligent app scientific research to realize "intelligent scientific research"
Disassembly cleaning
<ol dir="ltr">
<li>
Remove the shroud. Open the shroud first, press the buckle with your finger, and pull it out hard at the same time
</li>
<li>
Take off the bucket. Move the buckle of the bucket, release the bucket, hold the bucket and take it out.
</li>
<li>
Take it out. Put the bucket upside down, hold it well, and take it off with your neck open.
</li>
<li>
Pay attention to cleaning. Load, host body, wipe with chili cloth, then wipe with chili cloth
</li>
</ol>
Install after cleaning (please remind me that the bottom should be hung for thousands before installation! )
1. It is necessary to spin the large buckle on the standard barrel to the perfect fit for the large slot on the standard barrell.
2. Install the bucket. If you put the bucket flat on the host machine, you must buckle it.
3. Install the device. On the way, the card buckle will put the standard wine into the card slot to complete the installation.
4.Install food basins. The bowl is placed on the base of the basin, the base of the basin is fastened to the host, and the installation is completed.
Method of use
<ol dir="ltr">
<li>
Open the top plate.
</li>
<li>
Add half a barrel of bread
</li>
<li>
App Setting
</li>
</ol>
Tips for reminders
1. The shipping plan needs to be configured through APP, and the number of copies and time can be set after the appliance is set.
2. In the battery mode, APP process control is not supported, and the machine will be operated according to the previously set plan.
3. The eater supports Wifi 2.4G network, but does not support Wifi 5G. Please make sure that the router supports remote segment network before checking.
4. Do not put the food dispenser in the environment of the tide, and do not let the base of the food dispenser be immersed in water.
5. It is recommended that the food dispenser be dried once a month to achieve the best drying effect.
Heavy 2.01kg
Barrel capacity: 4L (about 2kg)
Product quality: ABS, 304mm.
Fixed power: 10W
Fixed input: 5V
Consumer electronics: 220V
Wireless connection: WiFi 2.4G
&nbsp;
Customer please read carefully the below shipping arrangement before purchase
<ul dir="ltr">
<li>
Products shall be delivered to the customer’s provided shipping address by ETTA International Limited ("Merchant") via using a third-party logistics company.&nbsp;Please visit <a href="url">https://www.onedegree.hk/en-us/privacy-policy</a> for more details about the policy of OneDegree Personal Information Collection Statement. 
</li>
<li>
Delivery service is only available in Hong Kong (including Hong Kong Island, Kowloon, and the New Territories). An additional fee of HK$20 will apply for every floor if delivery requires going upstairs.
</li>
<li>
Delivery time may vary depending on individual merchants’ shipping schedule, generally, products shall be shipped to the customer's provided delivery address within approximately 14 working days from the issuance of the "OneDegree Pet Mart Order Confirmation Notice email" However, delivery times may be affected by traffic, adverse weather, public holidays, and other special circumstances.
</li>
<li>
If the customer provides incorrect delivery information, or if the logistics company is unable to contact the customer multiple times, or if the customer refuses delivery, resulting in the product being returned to the Merchant, Merchant may arrange re-delivery, the customer will be responsible for additional shipping costs. OneDegree shall not be held responsible.
</li>
<li>
Merchant offers a 12-month self-carry warranty service for non-human damage, starting from the issue date of "OneDegree Pet Mart Order Confirmation Notice". The warranty period will not be extended or renewed for any repaired or replaced parts or products. Customers must present the "OneDegree Pet Mart Order Confirmation Notice" issued by OneDegree via email as the proof of purchase to enjoy warranty service. If the customer fails to provide this or if the information is incomplete, Merchant will refuse to provide maintenance services. For any inquiries regarding product maintenance, please call ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm).
</li>
<li>
Customers must agree to allow OneDegree to share their contact information for Merchant to arrange delivery of products. Merchant will contact the customer before delivery to confirm arrangements. If the customer needs to change delivery details, please contact ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm).
</li>
<li>
In case of any disputes, ETTA International Limited reserves the right to make the final decision.
</li>
</ul>

Homerun PF20 Mobile APP control Pocelain bowl Pet Feeder

Introduction: there are 15 proprietary 39 °T intelligent dryers, equipped with NTC intelligent control technology, the most comfortable 39 ℃ alloy feel of the model dog, the brushless DC machine, the tone is reduced to 40db, using the Archimedes helix principle to form a vertical loop channel, bottom feed, dry dead corner: built-in high-precision sensors and overload protection components, fully protect the safety of goods. 50L large space and window window, improve the drying system of human-user interaction in an all-round way, SPA comfortable care, intelligent control, to avoid errors caused by large differences.Feature:a. Intelligent control: keep the dog at ease, reject hypoxia and pain, warm in winter, comfortable in summer, and everything is fine. NTC Tech. (patent number: 202010992714.0). The temperature of ±1 degree is controlled by the environmental temperature: when the temperature is more than 16 degrees, the lowest actual temperature is the temperature.b. One machine can be used in many ways. A Horman oven = oven + oven + disinfectant refuses to be idle, and there is no limit.c. Weather mode, which can be used when not in use, warm in winter and summer, and practical pull.d. The flavor mode of "bacteria". After drying, start the active oxygen generator and fully disinfect the inside of the drying box. The sterilization efficiency is as high as 97%. Daily disinfection can also be carried out on food pots, toys and other items.e. You can love the dryer that blows and sleeps. The tone of the song is as low as 40db, and the soft tone does not stimulate sensitive feelings and enjoy the pleasant light of blowing hair.f. Mao Yun is reasonable. Baking and blowing together to blow out healthy hair. 300 yuan of hair, less hair, soft hair, smooth every fried hair.g. Open the window. 1. Open and close the window. It is used in the section where the goods are relatively unfamiliar to the drying box at the initial stage, and the owner can go through the window in the process of using the drying box. 2. A complete set of windows. If you are familiar with and adapt to the dryer, the owner can accompany you in the process of using the dryer.h. Let go of the game. Unlock the screen operation, slide the release. Feel sensitive, operation list: the sliding release function can effectively avoid miscontact.Instruction of Use:1. Regular operations:a. Turn on the power supply for a long timeb. Slide to solve the problem, and press the button to light up after success.c. If you slide again, you can load it. After success, only the power source and setting button will be lit.d. Short press the power source to light up.e. The brightness of the power source can be reduced by long-term pressure.f. Press the power source shutdown again2. Drying mode settinga. Short press mode press "cut" to soak drying / fast drying modeb. Enter the settings according to the settings, and improve the degree of integrity by increasing the number of settings.c. Press the settings to enter the time settings again, and adjust the working hours by adding and adjusting the working hoursd. Once again, set the input speed according to the configuration, and adjust the speed by increasing the speed.e. After the setup is complete, click on the start and stop button to start the operation.Tip: during the drying process, you can adjust the speed by increasing the temperature at any time.Tip: after the parameters are set, the next time you enter the drying mode, you can start the start-up session directly.3. Warm winter weather mode (please remove the window before using this mode)a. Short press mode press "cut" to warm in winter modeb. Enter the settings according to the settings, and improve the integrity by increasing the number of settings.c. Once again, set the input speed according to the configuration, and adjust the speed by increasing the speed.d. After the setup is complete, click on the start and stop button to start the operation.Tip: during the operation process, you can adjust the speed by increasing the speed from time to time.Tip: after the parameters are set, the next time you enter the warm winter mode, you can start the switch directly.4. Summer weather mode (please remove the window before using this mode)a. Press the short press mode and press "cut" to "summer" mode.b. Once again, set the input speed according to the configuration, and adjust the speed by increasing the speed.Tip: during the operation process, you can adjust the speed by increasing the speed from time to time.5. How to use the fungus mode (please install the window and close the door before using this mode. In the mode of fungus smell, please do not let the material into the drying oven.)a. Short press mode press "cut" to fast drying modeb. Then press "Flavor and Mode" to enter the bacterial flavor mode.c. Press the start and stop button to start the operationTip: in order to avoid entering this mode, the operation will slightly wait for 30 minutes after the bacteria are finished, the live oxygen will be completely dissipated, and then the product will be used again.6. Daily cleaninga. After the solution, press the power source to turn it off.b. Turn off the power supply and unplug the power supply.c. Remove the hair from the suction mouth.d. And wipe the inside of the box with a dishcloth.e. If there is sewage, the bottom drainage hole plug can be removed.f. Disassemble and wash the rear seatg. Cotton can be washed with clean water, dried through the net, and then packed back.Pay attention:-before use1. Open the door, remove the window window, and treat the goods as dogs / dogs for days to suit the internal environment of the oven.2. Open the summer warm / winter warm mode, and let the objects explore and adapt to the sound emitted by the drying oven in the case of low speed.-in use1. Please do not allow the goods to open the line range for easy inspection and immediate safety:2. It is recommended to open the drying mode first, so that the soft speed and sound can make things adapt more quickly.3. After the status of the puppy and the dog is set, slowly increase the speed or switch to the fast drying mode, and check the condition of the product at any time and adjust it at the right time. Size: 437mm X467mm X436mm Customer please read carefully the below shipping arrangement before purchase• Products shall be delivered to the customer’s provided shipping address by ETTA International Limited ("Merchant") via using a third-party logistics company. Please visit https://www.onedegree.hk/en-us/privacy-policy for more details about the policy of OneDegree Personal Information Collection Statement.• Delivery service is only available in Hong Kong (including Hong Kong Island, Kowloon, and the New Territories). An additional fee of HK$20 will apply for every floor if delivery requires going upstairs.• Delivery time may vary depending on individual merchants’ shipping schedule, generally, products shall be shipped to the customer's provided delivery address within approximately 14 working days from the issuance of the "OneDegree Pet Mart Order Confirmation Notice email" However, delivery times may be affected by traffic, adverse weather, public holidays, and other special circumstances.• If the customer provides incorrect delivery information, or if the logistics company is unable to contact the customer multiple times, or if the customer refuses delivery, resulting in the product being returned to the Merchant, Merchant may arrange re-delivery, the customer will be responsible for additional shipping costs. OneDegree shall not be held responsible.• Merchant offers a 12-month self-carry warranty service for non-human damage, starting from the issue date of "OneDegree Pet Mart Order Confirmation Notice". The warranty period will not be extended or renewed for any repaired or replaced parts or products. Customers must present the "OneDegree Pet Mart Order Confirmation Notice" issued by OneDegree via email as the proof of purchase to enjoy warranty service. If the customer fails to provide this or if the information is incomplete, Merchant will refuse to provide maintenance services. For any inquiries regarding product maintenance, please call ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm).• Customers must agree to allow OneDegree to share their contact information for Merchant to arrange delivery of products. Merchant will contact the customer before delivery to confirm arrangements. If the customer needs to change delivery details, please contact ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm).• In case of any disputes, ETTA International Limited reserves the right to make the final decision.

Introduction: 
there are 15 proprietary 39 °T intelligent dryers, equipped with NTC intelligent control technology, the most comfortable 39 ℃ alloy feel of the model dog, the brushless DC machine, the tone is reduced to 40db, using the Archimedes helix principle to form a vertical loop channel, bottom feed, dry dead corner: built-in high-precision sensors and overload protection components, fully protect the safety of goods. 50L large space and window window, improve the drying system of human-user interaction in an all-round way, SPA comfortable care, intelligent control, to avoid errors caused by large differences. Feature: a. Intelligent control: keep the dog at ease, reject hypoxia and pain, warm in winter, comfortable in summer, and everything is fine. NTC Tech. (patent number: 202010992714.0). The temperature of ±1 degree is controlled by the environmental temperature: when the temperature is more than 16 degrees, the lowest actual temperature is the temperature. b. One machine can be used in many ways. A Horman oven = oven + oven + disinfectant refuses to be idle, and there is no limit. c. Weather mode, which can be used when not in use, warm in winter and summer, and practical pull. d. The flavor mode of "bacteria". After drying, start the active oxygen generator and fully disinfect the inside of the drying box. The sterilization efficiency is as high as 97%. Daily disinfection can also be carried out on food pots, toys and other items. e. You can love the dryer that blows and sleeps. The tone of the song is as low as 40db, and the soft tone does not stimulate sensitive feelings and enjoy the pleasant light of blowing hair. f. Mao Yun is reasonable. Baking and blowing together to blow out healthy hair. 300 yuan of hair, less hair, soft hair, smooth every fried hair. g. Open the window. 1. Open and close the window. It is used in the section where the goods are relatively unfamiliar to the drying box at the initial stage, and the owner can go through the window in the process of using the drying box. 2. A complete set of windows. If you are familiar with and adapt to the dryer, the owner can accompany you in the process of using the dryer. h. Let go of the game. Unlock the screen operation, slide the release. Feel sensitive, operation list: the sliding release function can effectively avoid miscontact. Instruction of Use: 1. Regular operations: a. Turn on the power supply for a long time b. Slide to solve the problem, and press the button to light up after success. c. If you slide again, you can load it. After success, only the power source and setting button will be lit. d. Short press the power source to light up. e. The brightness of the power source can be reduced by long-term pressure. f. Press the power source shutdown again 2. Drying mode setting a. Short press mode press "cut" to soak drying / fast drying mode b. Enter the settings according to the settings, and improve the degree of integrity by increasing the number of settings. c. Press the settings to enter the time settings again, and adjust the working hours by adding and adjusting the working hours d. Once again, set the input speed according to the configuration, and adjust the speed by increasing the speed. e. After the setup is complete, click on the start and stop button to start the operation. Tip: during the drying process, you can adjust the speed by increasing the temperature at any time. Tip: after the parameters are set, the next time you enter the drying mode, you can start the start-up session directly. 3. Warm winter weather mode (please remove the window before using this mode) a. Short press mode press "cut" to warm in winter mode b. Enter the settings according to the settings, and improve the integrity by increasing the number of settings. c. Once again, set the input speed according to the configuration, and adjust the speed by increasing the speed. d. After the setup is complete, click on the start and stop button to start the operation. Tip: during the operation process, you can adjust the speed by increasing the speed from time to time. Tip: after the parameters are set, the next time you enter the warm winter mode, you can start the switch directly. 4. Summer weather mode (please remove the window before using this mode) a. Press the short press mode and press "cut" to "summer" mode. b. Once again, set the input speed according to the configuration, and adjust the speed by increasing the speed. Tip: during the operation process, you can adjust the speed by increasing the speed from time to time. 5. How to use the fungus mode (please install the window and close the door before using this mode. In the mode of fungus smell, please do not let the material into the drying oven.) a. Short press mode press "cut" to fast drying mode b. Then press "Flavor and Mode" to enter the bacterial flavor mode. c. Press the start and stop button to start the operation Tip: in order to avoid entering this mode, the operation will slightly wait for 30 minutes after the bacteria are finished, the live oxygen will be completely dissipated, and then the product will be used again. 6. Daily cleaning a. After the solution, press the power source to turn it off. b. Turn off the power supply and unplug the power supply. c. Remove the hair from the suction mouth. d. And wipe the inside of the box with a dishcloth. e. If there is sewage, the bottom drainage hole plug can be removed. f. Disassemble and wash the rear seat g. Cotton can be washed with clean water, dried through the net, and then packed back. Pay attention: -before use 1. Open the door, remove the window window, and treat the goods as dogs / dogs for days to suit the internal environment of the oven. 2. Open the summer warm / winter warm mode, and let the objects explore and adapt to the sound emitted by the drying oven in the case of low speed. -in use 1. Please do not allow the goods to open the line range for easy inspection and immediate safety: 2. It is recommended to open the drying mode first, so that the soft speed and sound can make things adapt more quickly. 3. After the status of the puppy and the dog is set, slowly increase the speed or switch to the fast drying mode, and check the condition of the product at any time and adjust it at the right time.
Size:&nbsp;437mm X467mm X436mm
Customer please read carefully the below shipping arrangement before purchase • Products shall be delivered to the customer’s provided shipping address by ETTA International Limited ("Merchant") via using a third-party logistics company. Please visit&nbsp;<a href="https://www.onedegree.hk/en-us/store/product/url" data-mce-fragment="1" data-mce-href="https://www.onedegree.hk/en-us/store/product/url">https://www.onedegree.hk/en-us/privacy-policy</a>&nbsp;for more details about the policy of OneDegree Personal Information Collection Statement. • Delivery service is only available in Hong Kong (including Hong Kong Island, Kowloon, and the New Territories). An additional fee of HK$20 will apply for every floor if delivery requires going upstairs. • Delivery time may vary depending on individual merchants’ shipping schedule, generally, products shall be shipped to the customer's provided delivery address within approximately 14 working days from the issuance of the "OneDegree Pet Mart Order Confirmation Notice email" However, delivery times may be affected by traffic, adverse weather, public holidays, and other special circumstances. • If the customer provides incorrect delivery information, or if the logistics company is unable to contact the customer multiple times, or if the customer refuses delivery, resulting in the product being returned to the Merchant, Merchant may arrange re-delivery, the customer will be responsible for additional shipping costs. OneDegree shall not be held responsible. • Merchant offers a 12-month self-carry warranty service for non-human damage, starting from the issue date of "OneDegree Pet Mart Order Confirmation Notice". The warranty period will not be extended or renewed for any repaired or replaced parts or products. Customers must present the "OneDegree Pet Mart Order Confirmation Notice" issued by OneDegree via email as the proof of purchase to enjoy warranty service. If the customer fails to provide this or if the information is incomplete, Merchant will refuse to provide maintenance services. For any inquiries regarding product maintenance, please call ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm). • Customers must agree to allow OneDegree to share their contact information for Merchant to arrange delivery of products. Merchant will contact the customer before delivery to confirm arrangements. If the customer needs to change delivery details, please contact ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm). • In case of any disputes, ETTA International Limited reserves the right to make the final decision.

HomeRun PD50 Pet Hair Dryer Ultra

HomeRun PD60 Pet Hair Dryer Ultra (Korean Edition)(The product interface is in Korean, with Traditional Chinese instructions included.) Introduction: there are 15 proprietary 39 °T intelligent dryers, equipped with NTC intelligent control technology, the most comfortable 39 ℃ alloy feel of the model dog, the brushless DC machine, the tone is reduced to 40db, using the Archimedes helix principle to form a vertical loop channel, bottom feed, dry dead corner: built-in high-precision sensors and overload protection components, fully protect the safety of goods. 50L large space and window window, improve the drying system of human-user interaction in an all-round way, SPA comfortable care, intelligent control, to avoid errors caused by large differences.Feature:a. Intelligent control: keep the dog at ease, reject hypoxia and pain, warm in winter, comfortable in summer, and everything is fine. NTC Tech. (patent number: 202010992714.0). The temperature of ±1 degree is controlled by the environmental temperature: when the temperature is more than 16 degrees, the lowest actual temperature is the temperature.b. One machine can be used in many ways. A Horman oven = oven + oven + disinfectant refuses to be idle, and there is no limit.c. Weather mode, which can be used when not in use, warm in winter and summer, and practical pull.d. The flavor mode of "bacteria". After drying, start the active oxygen generator and fully disinfect the inside of the drying box. The sterilization efficiency is as high as 97%. Daily disinfection can also be carried out on food pots, toys and other items.e. You can love the dryer that blows and sleeps. The tone of the song is as low as 40db, and the soft tone does not stimulate sensitive feelings and enjoy the pleasant light of blowing hair.f. Mao Yun is reasonable. Baking and blowing together to blow out healthy hair. 300 yuan of hair, less hair, soft hair, smooth every fried hair.g. Open the window. 1. Open and close the window. It is used in the section where the goods are relatively unfamiliar to the drying box at the initial stage, and the owner can go through the window in the process of using the drying box. 2. A complete set of windows. If you are familiar with and adapt to the dryer, the owner can accompany you in the process of using the dryer.h. Let go of the game. Unlock the screen operation, slide the release. Feel sensitive, operation list: the sliding release function can effectively avoid miscontact.Instruction of Use:1. Regular operations:a. Turn on the power supply for a long timeb. Slide to solve the problem, and press the button to light up after success.c. If you slide again, you can load it. After success, only the power source and setting button will be lit.d. Short press the power source to light up.e. The brightness of the power source can be reduced by long-term pressure.f. Press the power source shutdown again2. Drying mode settinga. Short press mode press "cut" to soak drying / fast drying modeb. Enter the settings according to the settings, and improve the degree of integrity by increasing the number of settings.c. Press the settings to enter the time settings again, and adjust the working hours by adding and adjusting the working hoursd. Once again, set the input speed according to the configuration, and adjust the speed by increasing the speed.e. After the setup is complete, click on the start and stop button to start the operation.Tip: during the drying process, you can adjust the speed by increasing the temperature at any time.Tip: after the parameters are set, the next time you enter the drying mode, you can start the start-up session directly.3. Warm winter weather mode (please remove the window before using this mode)a. Short press mode press "cut" to warm in winter modeb. Enter the settings according to the settings, and improve the integrity by increasing the number of settings.c. Once again, set the input speed according to the configuration, and adjust the speed by increasing the speed.d. After the setup is complete, click on the start and stop button to start the operation.Tip: during the operation process, you can adjust the speed by increasing the speed from time to time.Tip: after the parameters are set, the next time you enter the warm winter mode, you can start the switch directly.4. Summer weather mode (please remove the window before using this mode)a. Press the short press mode and press "cut" to "summer" mode.b. Once again, set the input speed according to the configuration, and adjust the speed by increasing the speed.Tip: during the operation process, you can adjust the speed by increasing the speed from time to time.5. How to use the fungus mode (please install the window and close the door before using this mode. In the mode of fungus smell, please do not let the material into the drying oven.)a. Short press mode press "cut" to fast drying modeb. Then press "Flavor and Mode" to enter the bacterial flavor mode.c. Press the start and stop button to start the operationTip: in order to avoid entering this mode, the operation will slightly wait for 30 minutes after the bacteria are finished, the live oxygen will be completely dissipated, and then the product will be used again.6. Daily cleaninga. After the solution, press the power source to turn it off.b. Turn off the power supply and unplug the power supply.c. Remove the hair from the suction mouth.d. And wipe the inside of the box with a dishcloth.e. If there is sewage, the bottom drainage hole plug can be removed.f. Disassemble and wash the rear seatg. Cotton can be washed with clean water, dried through the net, and then packed back.Pay attention:-before use1. Open the door, remove the window window, and treat the goods as dogs / dogs for days to suit the internal environment of the oven.2. Open the summer warm / winter warm mode, and let the objects explore and adapt to the sound emitted by the drying oven in the case of low speed.-in use1. Please do not allow the goods to open the line range for easy inspection and immediate safety:2. It is recommended to open the drying mode first, so that the soft speed and sound can make things adapt more quickly.3. After the status of the puppy and the dog is set, slowly increase the speed or switch to the fast drying mode, and check the condition of the product at any time and adjust it at the right time. Size: 437mm X467mm X436mm Customer please read carefully the below shipping arrangement before purchase Products shall be delivered to the customer’s provided shipping address by ETTA International Limited ("Merchant") via using a third-party logistics company. Please visit https://www.onedegree.hk/en-us/privacy-policy for more details about the policy of OneDegree Personal Information Collection Statement. Delivery service is only available in Hong Kong (including Hong Kong Island, Kowloon, and the New Territories). An additional fee of HK$20 will apply for every floor if delivery requires going upstairs. Delivery time may vary depending on individual merchants’ shipping schedule, generally, products shall be shipped to the customer's provided delivery address within approximately 14 working days from the issuance of the "OneDegree Pet Mart Order Confirmation Notice email" However, delivery times may be affected by traffic, adverse weather, public holidays, and other special circumstances. If the customer provides incorrect delivery information, or if the logistics company is unable to contact the customer multiple times, or if the customer refuses delivery, resulting in the product being returned to the Merchant, Merchant may arrange re-delivery, the customer will be responsible for additional shipping costs. OneDegree shall not be held responsible. Merchant offers a 12-month self-carry warranty service for non-human damage, starting from the issue date of "OneDegree Pet Mart Order Confirmation Notice". The warranty period will not be extended or renewed for any repaired or replaced parts or products. Customers must present the "OneDegree Pet Mart Order Confirmation Notice" issued by OneDegree via email as the proof of purchase to enjoy warranty service. If the customer fails to provide this or if the information is incomplete, Merchant will refuse to provide maintenance services. For any inquiries regarding product maintenance, please call ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm). Customers must agree to allow OneDegree to share their contact information for Merchant to arrange delivery of products. Merchant will contact the customer before delivery to confirm arrangements. If the customer needs to change delivery details, please contact ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm). In case of any disputes, ETTA International Limited reserves the right to make the final decision.

HomeRun PD60 Pet Hair Dryer Ultra

Introduction: Homerun D1 floating machine, 6 sides of the wing, double suction floating hair. Facing the U-shaped fuzz, the six sides do not get stuck. SGS international authority certificate, efficient desensitization of bacteria. The compound formula is activated carbon, and the deodorization is upgraded again. Mother-level clean space, to create a livable environment. Benefit: The main contents are as follows: There are six people on the wings, and the big oysters absorb the floating hair: the floating hair is free, and the home is fresh. Special product certificate, multiple rights certificate: except for allergen SGS international certificate, mother-level empty middle home certificate, except product flavor CNAS certificate. U-shaped poly wool channel: the floating hair adsorption rate is 95.01%. Large inlet at the bottom, effectively adsorbing floating hair on the ground: omni-directional solid adsorption, clean and re-upgraded. 2 sets of floating wool adsorbing "cotton + H13HEPA" core: floating wool adsorbing cotton, firmly catching and releasing. Du Fu's floating hair was put back into the air, causing secondary pollution. Mao Jie, that is, a tear, efficient and convenient. H13 HEPA core, eliminate allergens, protect the respiratory health of the whole family: remove allergens, allergens, pollen and other allergens, eliminate pathogenic viruses and human commensal bacteria effectively solve hair allergies. The formula deodorizes and purifies the five flavor ingredients. Size: 322mm X260mm X486mm Customer please read carefully the below shipping arrangement before purchase• Products shall be delivered to the customer’s provided shipping address by ETTA International Limited ("Merchant") via using a third-party logistics company. Please visit https://www.onedegree.hk/en-us/privacy-policy for more details about the policy of OneDegree Personal Information Collection Statement.• Delivery service is only available in Hong Kong (including Hong Kong Island, Kowloon, and the New Territories). An additional fee of HK$20 will apply for every floor if delivery requires going upstairs. • Delivery time may vary depending on individual merchants’ shipping schedule, generally, products shall be shipped to the customer's provided delivery address within approximately 14 working days from the issuance of the "OneDegree Pet Mart Order Confirmation Notice email" However, delivery times may be affected by traffic, adverse weather, public holidays, and other special circumstances.• If the customer provides incorrect delivery information, or if the logistics company is unable to contact the customer multiple times, or if the customer refuses delivery, resulting in the product being returned to the Merchant, Merchant may arrange re-delivery, the customer will be responsible for additional shipping costs. OneDegree shall not be held responsible.• Merchant offers a 12-month self-carry warranty service for non-human damage, starting from the issue date of "OneDegree Pet Mart Order Confirmation Notice". The warranty period will not be extended or renewed for any repaired or replaced parts or products. Customers must present the "OneDegree Pet Mart Order Confirmation Notice" issued by OneDegree via email as the proof of purchase to enjoy warranty service. If the customer fails to provide this or if the information is incomplete, Merchant will refuse to provide maintenance services. For any inquiries regarding product maintenance, please call ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm).• Customers must agree to allow OneDegree to share their contact information for Merchant to arrange delivery of products. Merchant will contact the customer before delivery to confirm arrangements. If the customer needs to change delivery details, please contact ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm).• In case of any disputes, ETTA International Limited reserves the right to make the final decision.

Introduction:&nbsp;
Homerun D1 floating machine, 6 sides of the wing, double suction floating hair. Facing the U-shaped fuzz, the six sides do not get stuck. SGS international authority certificate, efficient desensitization of bacteria. The compound formula is activated carbon, and the deodorization is upgraded again. Mother-level clean space, to create a livable environment.
 Benefit:
The main contents are as follows:
<ol dir="ltr">
<li>
There are six people on the wings, and the big oysters absorb the floating hair: the floating hair is free, and the home is fresh.
</li>
<li>
Special product certificate, multiple rights certificate: except for allergen SGS international certificate, mother-level empty middle home certificate, except product flavor CNAS certificate.
</li>
<li>
U-shaped poly wool channel: the floating hair adsorption rate is 95.01%.
</li>
<li>
Large inlet at the bottom, effectively adsorbing floating hair on the ground: omni-directional solid adsorption, clean and re-upgraded.
</li>
<li>
2 sets of floating wool adsorbing "cotton + H13HEPA" core: floating wool adsorbing cotton, firmly catching and releasing. Du Fu's floating hair was put back into the air, causing secondary pollution. Mao Jie, that is, a tear, efficient and convenient.
</li>
<li>
H13 HEPA core, eliminate allergens, protect the respiratory health of the whole family: remove allergens, allergens, pollen and other allergens, eliminate pathogenic viruses and human commensal bacteria effectively solve hair allergies.
</li>
<li>
The formula deodorizes and purifies the five flavor ingredients.
</li>
</ol>
Size: &nbsp;322mm X260mm X486mm
&nbsp;
Customer please read carefully the below shipping arrangement before purchase • Products shall be delivered to the customer’s provided shipping address by ETTA International Limited ("Merchant") via using a third-party logistics company. Please visit <a href="url">https://www.onedegree.hk/en-us/privacy-policy</a> for more details about the policy of OneDegree Personal Information Collection Statement. • Delivery service is only available in Hong Kong (including Hong Kong Island, Kowloon, and the New Territories). An additional fee of HK$20 will apply for every floor if delivery requires going upstairs. • Delivery time may vary depending on individual merchants’ shipping schedule, generally, products shall be shipped to the customer's provided delivery address within approximately 14 working days from the issuance of the "OneDegree Pet Mart Order Confirmation Notice email" However, delivery times may be affected by traffic, adverse weather, public holidays, and other special circumstances. • If the customer provides incorrect delivery information, or if the logistics company is unable to contact the customer multiple times, or if the customer refuses delivery, resulting in the product being returned to the Merchant, Merchant may arrange re-delivery, the customer will be responsible for additional shipping costs. OneDegree shall not be held responsible. • Merchant offers a 12-month self-carry warranty service for non-human damage, starting from the issue date of "OneDegree Pet Mart Order Confirmation Notice". The warranty period will not be extended or renewed for any repaired or replaced parts or products. Customers must present the "OneDegree Pet Mart Order Confirmation Notice" issued by OneDegree via email as the proof of purchase to enjoy warranty service. If the customer fails to provide this or if the information is incomplete, Merchant will refuse to provide maintenance services. For any inquiries regarding product maintenance, please call ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm). • Customers must agree to allow OneDegree to share their contact information for Merchant to arrange delivery of products. Merchant will contact the customer before delivery to confirm arrangements. If the customer needs to change delivery details, please contact ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm). • In case of any disputes, ETTA International Limited reserves the right to make the final decision.

Homerun D1 Pet Air Purifier

Introduction: Product gross weight4.2kgProduct size346x291x313mmRated input5V 1AProduct colorWhiteRated power5WMain materialMelamine, ABSPackaging size404x339x362mm Feature Lock pressurization Active pressurization, insurance upgrade Screw on the lid and it will be pumped Automatic vacuuming 360° silicone seal is not easy to hide grain, quick to disassemble and easy to wash Moisture proof drying bag can be replaced, long term preservation Intelligent constant pressure Real time monitoring, automatic pressure replenishment 32° slope design Vacuuming is more successful without grain residue accumulation Customer please read carefully the below shipping arrangement before purchase• Products shall be delivered to the customer’s provided shipping address by ETTA International Limited ("Merchant") via using a third-party logistics company. Please visit https://www.onedegree.hk/en-us/privacy-policy for more details about the policy of OneDegree Personal Information Collection Statement.• Delivery service is only available in Hong Kong (including Hong Kong Island, Kowloon, and the New Territories). An additional fee of HK$20 will apply for every floor if delivery requires going upstairs. • Delivery time may vary depending on individual merchants’ shipping schedule, generally, products shall be shipped to the customer's provided delivery address within approximately 14 working days from the issuance of the "OneDegree Pet Mart Order Confirmation Notice email" However, delivery times may be affected by traffic, adverse weather, public holidays, and other special circumstances.• If the customer provides incorrect delivery information, or if the logistics company is unable to contact the customer multiple times, or if the customer refuses delivery, resulting in the product being returned to the Merchant, Merchant may arrange re-delivery, the customer will be responsible for additional shipping costs. OneDegree shall not be held responsible.• Merchant offers a 12-month self-carry warranty service for non-human damage, starting from the issue date of "OneDegree Pet Mart Order Confirmation Notice". The warranty period will not be extended or renewed for any repaired or replaced parts or products. Customers must present the "OneDegree Pet Mart Order Confirmation Notice" issued by OneDegree via email as the proof of purchase to enjoy warranty service. If the customer fails to provide this or if the information is incomplete, Merchant will refuse to provide maintenance services. For any inquiries regarding product maintenance, please call ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm).• Customers must agree to allow OneDegree to share their contact information for Merchant to arrange delivery of products. Merchant will contact the customer before delivery to confirm arrangements. If the customer needs to change delivery details, please contact ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm).• In case of any disputes, ETTA International Limited reserves the right to make the final decision.

Introduction:&nbsp;
Product gross weight 4.2kg Product size 346x291x313mm Rated input 5V 1A Product color White Rated power 5W Main material Melamine, ABS Packaging size 404x339x362mm 
Feature
<ul>
<li>Lock pressurization</li>
<li>Active pressurization, insurance upgrade</li>
<li>Screw on the lid and it will be pumped</li>
<li>Automatic vacuuming</li>
<li>360° silicone seal is not easy to hide grain, quick to disassemble and easy to wash</li>
<li>Moisture proof drying bag can be replaced, long term preservation</li>
<li>Intelligent constant pressure</li>
<li>Real time monitoring, automatic pressure replenishment</li>
<li>32° slope design</li>
<li>Vacuuming is more successful without grain residue accumulation</li>
</ul>
&nbsp;
Customer please read carefully the below shipping arrangement before purchase • Products shall be delivered to the customer’s provided shipping address by ETTA International Limited ("Merchant") via using a third-party logistics company. Please visit <a href="url">https://www.onedegree.hk/en-us/privacy-policy</a> for more details about the policy of OneDegree Personal Information Collection Statement. • Delivery service is only available in Hong Kong (including Hong Kong Island, Kowloon, and the New Territories). An additional fee of HK$20 will apply for every floor if delivery requires going upstairs. • Delivery time may vary depending on individual merchants’ shipping schedule, generally, products shall be shipped to the customer's provided delivery address within approximately 14 working days from the issuance of the "OneDegree Pet Mart Order Confirmation Notice email" However, delivery times may be affected by traffic, adverse weather, public holidays, and other special circumstances. • If the customer provides incorrect delivery information, or if the logistics company is unable to contact the customer multiple times, or if the customer refuses delivery, resulting in the product being returned to the Merchant, Merchant may arrange re-delivery, the customer will be responsible for additional shipping costs. OneDegree shall not be held responsible. • Merchant offers a 12-month self-carry warranty service for non-human damage, starting from the issue date of "OneDegree Pet Mart Order Confirmation Notice". The warranty period will not be extended or renewed for any repaired or replaced parts or products. Customers must present the "OneDegree Pet Mart Order Confirmation Notice" issued by OneDegree via email as the proof of purchase to enjoy warranty service. If the customer fails to provide this or if the information is incomplete, Merchant will refuse to provide maintenance services. For any inquiries regarding product maintenance, please call ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm). • Customers must agree to allow OneDegree to share their contact information for Merchant to arrange delivery of products. Merchant will contact the customer before delivery to confirm arrangements. If the customer needs to change delivery details, please contact ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm). • In case of any disputes, ETTA International Limited reserves the right to make the final decision.

HomeRun Pet food storage bucket

Product Description Designed for households with one or multiple cats, this smart self-cleaning litter box offers a spacious interior, intelligent litter management, advanced odour control, and comprehensive safety protection for a cleaner, more convenient litter box experience. Key Features Extra-Large 106L Interior – Spacious enough for cats up to 20 catties (approx. 10 kg), allowing them to stand and turn around comfortably. 8L Litter Bin + 12L Waste Container – Holds more litter and waste, reducing the frequency of refilling and emptying. Smart Litter Monitoring – TOF laser sensors continuously monitor litter levels and automatically refill and level the litter surface. Patented Hill-Shaped Litter Base – Ergonomically designed to match your cat's natural toileting posture while reducing litter sticking. Dual Odour Control – Active oxygen deodorisation and an automatic sealing door help lock in odours at the source. The soft stool mode delays cleaning to allow waste to dry, reducing residue and smearing. Comprehensive Safety Protection – Features anti-pinch protection with microwave radar and weight sensors that instantly pause operation when your cat approaches. Smart App Control – Remotely monitor your cat's litter box usage, schedule cleaning cycles, activate one-touch litter emptying, and receive usage insights via the mobile app. Compatible with Mineral & Tofu Cat Litter – Works with both bentonite (clumping) and tofu cat litter. Easy to Clean – Three-step disassembly allows thorough cleaning with no hard-to-reach corners. Specifications Dimensions (W × H × D): 600 × 710 × 700 mm Package Dimensions (W × H × D): 710 × 790 × 810 mm Package Weight: 10.5 kg

<h1>Product Description</h1>
Designed for households with one or multiple cats, this smart self-cleaning litter box offers a spacious interior, intelligent litter management, advanced odour control, and comprehensive safety protection for a cleaner, more convenient litter box experience.
<h2>Key Features</h2>
<ul>
<li>
Extra-Large 106L Interior &ndash; Spacious enough for cats up to 20 catties (approx. 10 kg), allowing them to stand and turn around comfortably.
</li>
<li>
8L Litter Bin + 12L Waste Container &ndash; Holds more litter and waste, reducing the frequency of refilling and emptying.
</li>
<li>
Smart Litter Monitoring &ndash; TOF laser sensors continuously monitor litter levels and automatically refill and level the litter surface.
</li>
<li>
Patented Hill-Shaped Litter Base &ndash; Ergonomically designed to match your cat's natural toileting posture while reducing litter sticking.
</li>
<li>
Dual Odour Control &ndash; Active oxygen deodorisation and an automatic sealing door help lock in odours at the source. The soft stool mode delays cleaning to allow waste to dry, reducing residue and smearing.
</li>
<li>
Comprehensive Safety Protection &ndash; Features anti-pinch protection with microwave radar and weight sensors that instantly pause operation when your cat approaches.
</li>
<li>
Smart App Control &ndash; Remotely monitor your cat's litter box usage, schedule cleaning cycles, activate one-touch litter emptying, and receive usage insights via the mobile app.
</li>
<li>
Compatible with Mineral &amp; Tofu Cat Litter &ndash; Works with both bentonite (clumping) and tofu cat litter.
</li>
<li>
Easy to Clean &ndash; Three-step disassembly allows thorough cleaning with no hard-to-reach corners.
</li>
</ul>
<h2>Specifications</h2>
<ul>
<li>
Dimensions (W &times; H &times; D): 600 &times; 710 &times; 700 mm
</li>
<li>
Package Dimensions (W &times; H &times; D): 710 &times; 790 &times; 810 mm
</li>
<li>
Package Weight: 10.5 kg
</li>
</ul>

Homerun Auto Cat Litter Box

Introduction: Homerun water machine, wireless service + wireless water pump, good in skills, heavy in maintenance. Unlimited water pump, parts level disassembly and washing, no brush computer, longer life. The plug is safe, the electromagnetic induction is supplied, and the water supply is separated all the time. If you fill it with water, you can continue to get out of the water. The sub system design of the dryer is convenient for filling and cleaning. "Bing" tone < 20dB (A)Feature:a. Free storage, where the source of water can be seen: insert restrictions, set multiple water points, more in line with the water supply.b.180 °super angle sensor, to counteract the confusion of running water, microwave Redda design precision capture, stimulate the nature of running water.c. Water pipe separation: it is also safe to charge and use, magneto magnetic induction supply, water related parts, do not guide and do not leak.d. Parts level disassembly and washing: quickly disassemble and wash, clean the dead corner, and the inside of the pump can be disassembled and washed.e. Durable: Horman unlimited pump, longer life than vacuum diaphragm pump, more durable.f.3 heavy filter: the first weight, high density microporous cotton, can cut off wool, debris. The second is coconut activated carbon, which is full of chlorine and odor. The third is high density microporous cotton, which absorbs tiny particles.g. Food and water supply: > 90% out of the water, effectively remove surface hair, debris, and guarantee water quality all the time.h.20dB does not have any information.Hint:1. Water cooler cores and accessories (including buckets, outlet pipes, pumps, sea pipes) are recommended to clean at least once per tank, and clean the water source more thoroughly, so as to avoid sinking and blocking the water pump to cause water outflow and fungus breeding.2. Do not use water washing machines or water dispensers that exceed 40 °. It is easy to cause the parts to be out of shape and affect the normal use of the water machine.3. If you place the water cooler on the level plane, the tilting may affect the normal operation of the water cooler.4. When adding water to the water machine, please keep the amount of water under the maximum scale.Children under the age of 5 and 8 may not operate this equipment, and children may not clean and maintain the equipment without adult supervision.6. Do not prevent this equipment from being on the tidal ground, nor contact the surface of the water or immerse it in water. Customer please read carefully the below shipping arrangement before purchase• Products shall be delivered to the customer’s provided shipping address by ETTA International Limited ("Merchant") via using a third-party logistics company. Please visit https://www.onedegree.hk/en-us/privacy-policy for more details about the policy of OneDegree Personal Information Collection Statement.• Delivery service is only available in Hong Kong (including Hong Kong Island, Kowloon, and the New Territories). An additional fee of HK$20 will apply for every floor if delivery requires going upstairs. • Delivery time may vary depending on individual merchants’ shipping schedule, generally, products shall be shipped to the customer's provided delivery address within approximately 14 working days from the issuance of the "OneDegree Pet Mart Order Confirmation Notice email" However, delivery times may be affected by traffic, adverse weather, public holidays, and other special circumstances.• If the customer provides incorrect delivery information, or if the logistics company is unable to contact the customer multiple times, or if the customer refuses delivery, resulting in the product being returned to the Merchant, Merchant may arrange re-delivery, the customer will be responsible for additional shipping costs. OneDegree shall not be held responsible.• Merchant offers a 12-month self-carry warranty service for non-human damage, starting from the issue date of "OneDegree Pet Mart Order Confirmation Notice". The warranty period will not be extended or renewed for any repaired or replaced parts or products. Customers must present the "OneDegree Pet Mart Order Confirmation Notice" issued by OneDegree via email as the proof of purchase to enjoy warranty service. If the customer fails to provide this or if the information is incomplete, Merchant will refuse to provide maintenance services. For any inquiries regarding product maintenance, please call ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm).• Customers must agree to allow OneDegree to share their contact information for Merchant to arrange delivery of products. Merchant will contact the customer before delivery to confirm arrangements. If the customer needs to change delivery details, please contact ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm).• In case of any disputes, ETTA International Limited reserves the right to make the final decision.

Introduction:&nbsp;
Homerun water machine,&nbsp;wireless&nbsp;service + wireless water pump, good in skills, heavy in maintenance. Unlimited water pump, parts level disassembly and washing, no brush computer, longer life. The plug is safe, the electromagnetic induction is supplied, and the water supply is separated all the time. If you fill it with water, you can continue to get out of the water. The sub system design of the dryer is convenient for filling and cleaning. "Bing" tone &lt; 20dB (A) Feature: a. Free storage, where the source of water can be seen: insert restrictions, set multiple water points, more in line with the water supply. b.180 °super angle sensor, to counteract the confusion of running water, microwave Redda design precision capture, stimulate the nature of running water. c. Water pipe separation: it is also safe to charge and use, magneto magnetic induction supply, water related parts, do not guide and do not leak. d. Parts level disassembly and washing: quickly disassemble and wash, clean the dead corner, and the inside of the pump can be disassembled and washed. e. Durable: Horman unlimited pump, longer life than vacuum diaphragm pump, more durable. f.3 heavy filter: the first weight, high density microporous cotton, can cut off wool, debris. The second is coconut activated carbon, which is full of chlorine and odor. The third is high density microporous cotton, which absorbs tiny particles. g. Food and water supply: &gt; 90% out of the water, effectively remove surface hair, debris, and guarantee water quality all the time. h.20dB does not have any information. Hint: 1. Water cooler cores and accessories (including buckets, outlet pipes, pumps, sea pipes) are recommended to clean at least once per tank, and clean the water source more thoroughly, so as to avoid sinking and blocking the water pump to cause water outflow and fungus breeding. 2. Do not use water washing machines or water dispensers that exceed 40 °. It is easy to cause the parts to be out of shape and affect the normal use of the water machine. 3. If you place the water cooler on the level plane, the tilting may affect the normal operation of the water cooler. 4. When adding water to the water machine, please keep the amount of water under the maximum scale. Children under the age of 5 and 8 may not operate this equipment, and children may not clean and maintain the equipment without adult supervision. 6. Do not prevent this equipment from being on the tidal ground, nor contact the surface of the water or immerse it in water. 
Customer please read carefully the below shipping arrangement before purchase • Products shall be delivered to the customer’s provided shipping address by ETTA International Limited ("Merchant") via using a third-party logistics company. Please visit <a href="url">https://www.onedegree.hk/en-us/privacy-policy</a> for more details about the policy of OneDegree Personal Information Collection Statement. • Delivery service is only available in Hong Kong (including Hong Kong Island, Kowloon, and the New Territories). An additional fee of HK$20 will apply for every floor if delivery requires going upstairs. • Delivery time may vary depending on individual merchants’ shipping schedule, generally, products shall be shipped to the customer's provided delivery address within approximately 14 working days from the issuance of the "OneDegree Pet Mart Order Confirmation Notice email" However, delivery times may be affected by traffic, adverse weather, public holidays, and other special circumstances. • If the customer provides incorrect delivery information, or if the logistics company is unable to contact the customer multiple times, or if the customer refuses delivery, resulting in the product being returned to the Merchant, Merchant may arrange re-delivery, the customer will be responsible for additional shipping costs. OneDegree shall not be held responsible. • Merchant offers a 12-month self-carry warranty service for non-human damage, starting from the issue date of "OneDegree Pet Mart Order Confirmation Notice". The warranty period will not be extended or renewed for any repaired or replaced parts or products. Customers must present the "OneDegree Pet Mart Order Confirmation Notice" issued by OneDegree via email as the proof of purchase to enjoy warranty service. If the customer fails to provide this or if the information is incomplete, Merchant will refuse to provide maintenance services. For any inquiries regarding product maintenance, please call ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm). • Customers must agree to allow OneDegree to share their contact information for Merchant to arrange delivery of products. Merchant will contact the customer before delivery to confirm arrangements. If the customer needs to change delivery details, please contact ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm). • In case of any disputes, ETTA International Limited reserves the right to make the final decision.

HomeRun BF10 Wireless Pet Water Fountain

Member Discount / Black

Member Discount / White

Policyholder Exclusive Price / Black

Policyholder Exclusive Price / White

HomeRun Cat Scratch Board for Weight ScaleDoes not include weight scale Replaceable cat scratching post, economical, environmentally friendly, double-sided,Material: ABS, corrugated paper Customer please read carefully the below shipping arrangement before purchase:• Customers must allow OneDegree to provide their contact information to the merchants for arranging the delivery service via the third-party logistics company. Please visit https://www.onedegree.hk/en-us/privacy-policy for more details about the policy of OneDegree Personal Information Collection Statement.• Products shall be delivered to the customer’s provided shipping address by ETTA International Limited ("Merchant") via using a third-party logistics company.• Delivery service is only available in Hong Kong (including Hong Kong Island, Kowloon, and the New Territories). An additional fee of HK$20 will apply for every floor if delivery requires going upstairs. • Delivery time may vary depending on individual merchants’ shipping schedule, generally, products shall be shipped to the customer's provided delivery address within approximately 14 working days from the issuance of the "OneDegree Pet Mart Order Confirmation Notice email" However, delivery times may be affected by traffic, adverse weather, public holidays, and other special circumstances.• If the customer provides incorrect delivery information, or if the logistics company is unable to contact the customer multiple times, or if the customer refuses delivery, resulting in the product being returned to the Merchant, Merchant may arrange re-delivery, the customer will be responsible for additional shipping costs. OneDegree shall not be held responsible.• Merchant offers a 12-month self-carry warranty service for non-human damage, starting from the issue date of "OneDegree Pet Mart Order Confirmation Notice". The warranty period will not be extended or renewed for any repaired or replaced parts or products. Customers must present the "OneDegree Pet Mart Order Confirmation Notice" issued by OneDegree via email as the proof of purchase to enjoy warranty service. If the customer fails to provide this or if the information is incomplete, Merchant will refuse to provide maintenance services. For any inquiries regarding product maintenance, please call ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm).• Customers must agree to allow OneDegree to share their contact information for Merchant to arrange delivery of products. Merchant will contact the customer before delivery to confirm arrangements. If the customer needs to change delivery details, please contact ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm).• In case of any disputes, ETTA International Limited reserves the right to make the final decision.

HomeRun Cat Scratch Board for Weight Scale Does not include weight scale
Replaceable cat scratching post, economical, environmentally friendly, double-sided, Material: ABS, corrugated paper 
Customer please read carefully the below shipping arrangement before purchase: • Customers must allow OneDegree to provide their contact information to the merchants for arranging the delivery service via the third-party logistics company. Please visit https://www.onedegree.hk/en-us/privacy-policy for more details about the policy of OneDegree Personal Information Collection Statement. • Products shall be delivered to the customer’s provided shipping address by ETTA International Limited ("Merchant") via using a third-party logistics company. • Delivery service is only available in Hong Kong (including Hong Kong Island, Kowloon, and the New Territories). An additional fee of HK$20 will apply for every floor if delivery requires going upstairs. • Delivery time may vary depending on individual merchants’ shipping schedule, generally, products shall be shipped to the customer's provided delivery address within approximately 14 working days from the issuance of the "OneDegree Pet Mart Order Confirmation Notice email" However, delivery times may be affected by traffic, adverse weather, public holidays, and other special circumstances. • If the customer provides incorrect delivery information, or if the logistics company is unable to contact the customer multiple times, or if the customer refuses delivery, resulting in the product being returned to the Merchant, Merchant may arrange re-delivery, the customer will be responsible for additional shipping costs. OneDegree shall not be held responsible. • Merchant offers a 12-month self-carry warranty service for non-human damage, starting from the issue date of "OneDegree Pet Mart Order Confirmation Notice". The warranty period will not be extended or renewed for any repaired or replaced parts or products. Customers must present the "OneDegree Pet Mart Order Confirmation Notice" issued by OneDegree via email as the proof of purchase to enjoy warranty service. If the customer fails to provide this or if the information is incomplete, Merchant will refuse to provide maintenance services. For any inquiries regarding product maintenance, please call ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm). • Customers must agree to allow OneDegree to share their contact information for Merchant to arrange delivery of products. Merchant will contact the customer before delivery to confirm arrangements. If the customer needs to change delivery details, please contact ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm). • In case of any disputes, ETTA International Limited reserves the right to make the final decision.

HomeRun Cat Scratch Board for Weight Scale

Introduction: Double door design, front door entry, top exit, top anti-sand corridorThe extra-large internal space can accommodate a 20-pound cat. The bottom drawer design makes cleaning cat litter easy and convenientAdvantagesExtra long corridor for placing sand. Enter from the front and exit from the top, allowing the cat to shake off all the cat litter while jumping. The 5.5mm wide grid allows the tofu litter to fall back smoothly (bentonite cat litter is not recommended).Drawer on casters. The drawer-style design makes cleaning more convenient. The drawer has pulleys at the bottom, so it is easy to pull out the 13L cat litter.3. The antibacterial rate in 1 hour is as high as: 96.18%.*Data source: real simulation test in Hohmann laboratoryThe entrance is adjustable to suit all ages. The limit block is installed with the protrusion facing downwards, which instantly turns into a two-way door, so that small cats can easily enter and exit How to useHow to use the litter box: The cat enters the litter box from the front door or the top. Jump out from the top again.Multifunctional door curtain: a. The limit block is installed with the convex upper part, and the door curtain is only used in one direction: b. The limit block is installed with the convex part facing downward, and the door curtain can be opened in both directions, making it convenient for kittens to enter and exit.Cleaning/replacing special sand: The bottom of the sand storage box is equipped with a pulley, just pull it out gentlyEasily clean or change the litter and push it back when you're doneCat litter scoop storage: a. When not in use, press the hook to hang it outside the cat litter box. b. When in use, retract the hook and put the palm of your hand against the shovel handle. Kind tipsSuggestions for use: This cat litter box adopts a drawer-style design that is easy to disassemble and clean. If your cat has the habit of urinating against the wall frequently and digging the litter vigorously, urine may seep into the gaps in the drawer and cat litter may get stuck during use.Recommendations for daily use: Clean regularly to maintain hygiene. You can also consider placing it in a place that is easy to clean, and at the same time, through guidance or training, let the cat develop good toilet habits.Material: ABSWeight: 4.5kgRecommended cat litter volume: 6LMaximum cat litter volume: 13L Customer please read carefully the below shipping arrangement before purchase:• Customers must allow OneDegree to provide their contact information to the merchants for arranging the delivery service via the third-party logistics company. Please visit https://www.onedegree.hk/en-us/privacy-policy for more details about the policy of OneDegree Personal Information Collection Statement.• Products shall be delivered to the customer’s provided shipping address by ETTA International Limited ("Merchant") via using a third-party logistics company.• Delivery service is only available in Hong Kong (including Hong Kong Island, Kowloon, and the New Territories). An additional fee of HK$20 will apply for every floor if delivery requires going upstairs. • Delivery time may vary depending on individual merchants’ shipping schedule, generally, products shall be shipped to the customer's provided delivery address within approximately 14 working days from the issuance of the "OneDegree Pet Mart Order Confirmation Notice email" However, delivery times may be affected by traffic, adverse weather, public holidays, and other special circumstances.• If the customer provides incorrect delivery information, or if the logistics company is unable to contact the customer multiple times, or if the customer refuses delivery, resulting in the product being returned to the Merchant, Merchant may arrange re-delivery, the customer will be responsible for additional shipping costs. OneDegree shall not be held responsible.• Merchant offers a 12-month self-carry warranty service for non-human damage, starting from the issue date of "OneDegree Pet Mart Order Confirmation Notice". The warranty period will not be extended or renewed for any repaired or replaced parts or products. Customers must present the "OneDegree Pet Mart Order Confirmation Notice" issued by OneDegree via email as the proof of purchase to enjoy warranty service. If the customer fails to provide this or if the information is incomplete, Merchant will refuse to provide maintenance services. For any inquiries regarding product maintenance, please call ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm).• Customers must agree to allow OneDegree to share their contact information for Merchant to arrange delivery of products. Merchant will contact the customer before delivery to confirm arrangements. If the customer needs to change delivery details, please contact ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm).• In case of any disputes, ETTA International Limited reserves the right to make the final decision.

Introduction:&nbsp;
Double door design, front door entry, top exit, top anti-sand corridor The extra-large internal space can accommodate a 20-pound cat. The bottom drawer design makes cleaning cat litter easy and convenient Advantages Extra long corridor for placing sand. Enter from the front and exit from the top, allowing the cat to shake off all the cat litter while jumping. The 5.5mm wide grid allows the tofu litter to fall back smoothly (bentonite cat litter is not recommended). Drawer on casters. The drawer-style design makes cleaning more convenient. The drawer has pulleys at the bottom, so it is easy to pull out the 13L cat litter. 3. The antibacterial rate in 1 hour is as high as: 96.18%. *Data source: real simulation test in Hohmann laboratory The entrance is adjustable to suit all ages. The limit block is installed with the protrusion facing downwards, which instantly turns into a two-way door, so that small cats can easily enter and exit 
How to use How to use the litter box: The cat enters the litter box from the front door or the top. Jump out from the top again. Multifunctional door curtain: a. The limit block is installed with the convex upper part, and the door curtain is only used in one direction: b. The limit block is installed with the convex part facing downward, and the door curtain can be opened in both directions, making it convenient for kittens to enter and exit. Cleaning/replacing special sand: The bottom of the sand storage box is equipped with a pulley, just pull it out gently Easily clean or change the litter and push it back when you're done Cat litter scoop storage: a. When not in use, press the hook to hang it outside the cat litter box. b. When in use, retract the hook and put the palm of your hand against the shovel handle. 
Kind tips Suggestions for use: This cat litter box adopts a drawer-style design that is easy to disassemble and clean. If your cat has the habit of urinating against the wall frequently and digging the litter vigorously, urine may seep into the gaps in the drawer and cat litter may get stuck during use. Recommendations for daily use: Clean regularly to maintain hygiene. You can also consider placing it in a place that is easy to clean, and at the same time, through guidance or training, let the cat develop good toilet habits. Material: ABS Weight: 4.5kg Recommended cat litter volume: 6L Maximum cat litter volume: 13L
Customer please read carefully the below shipping arrangement before purchase: • Customers must allow OneDegree to provide their contact information to the merchants for arranging the delivery service via the third-party logistics company. Please visit https://www.onedegree.hk/en-us/privacy-policy for more details about the policy of OneDegree Personal Information Collection Statement. • Products shall be delivered to the customer’s provided shipping address by ETTA International Limited ("Merchant") via using a third-party logistics company. • Delivery service is only available in Hong Kong (including Hong Kong Island, Kowloon, and the New Territories). An additional fee of HK$20 will apply for every floor if delivery requires going upstairs. • Delivery time may vary depending on individual merchants’ shipping schedule, generally, products shall be shipped to the customer's provided delivery address within approximately 14 working days from the issuance of the "OneDegree Pet Mart Order Confirmation Notice email" However, delivery times may be affected by traffic, adverse weather, public holidays, and other special circumstances. • If the customer provides incorrect delivery information, or if the logistics company is unable to contact the customer multiple times, or if the customer refuses delivery, resulting in the product being returned to the Merchant, Merchant may arrange re-delivery, the customer will be responsible for additional shipping costs. OneDegree shall not be held responsible. • Merchant offers a 12-month self-carry warranty service for non-human damage, starting from the issue date of "OneDegree Pet Mart Order Confirmation Notice". The warranty period will not be extended or renewed for any repaired or replaced parts or products. Customers must present the "OneDegree Pet Mart Order Confirmation Notice" issued by OneDegree via email as the proof of purchase to enjoy warranty service. If the customer fails to provide this or if the information is incomplete, Merchant will refuse to provide maintenance services. For any inquiries regarding product maintenance, please call ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm). • Customers must agree to allow OneDegree to share their contact information for Merchant to arrange delivery of products. Merchant will contact the customer before delivery to confirm arrangements. If the customer needs to change delivery details, please contact ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm). • In case of any disputes, ETTA International Limited reserves the right to make the final decision.

HomeRun CLB10MB Basic Cat Litter Box (Volume: 13L)

Introduction: High-precision sensor, can sense ±2g weight change, weigh while playing, no more embarrassment of weighing your cat while holding itAlways know your cat's weight and health status. The design is simple and elegant, perfectly integrated into the modern home space.Description:1. Cat's ParadiseWeighing, lying, grabbing and playing all in one, a cat's playground on the scale. It is not only a cat scratching board where cats can sharpen their claws and play to their heart's content, but it also has an integrated weighing scale function, allowing owners to easily monitor their pets' weight changes.2. Intelligent design:This product uses advanced sensor technology to quickly and accurately measure your pet's weight. 3. Replaceable cat scratching post, economical, environmentally friendly, double-sided. For the money of a cup of milk tea, I can buy a new scratching board for my pet.Instructions for use:1. Product PreparationMake sure the cat scratching post scale is placed on a flat and stable surface.Check the batteries or power connection (depending on the model) on your cat scratching post scale to make sure there is adequate power.Make sure the scratching post scale surface is clean and free of any obstructions or debris.2. Use the cat scratching board functionGuide your cat to the scratching post scale and let them get familiar with the new toy.Cats will naturally use their claws to sharpen the surface of the scratching board, which can satisfy their natural habits and help them keep their claws healthy.3. Use the scale functionWhen you want to weigh your pet, make sure your pet is standing in the center of the scratching post scale and remains stable.Turn on the scale (usually by pressing a button or touching the screen).Wait a few moments to allow the scale to accurately measure your pet's weight.Read the number on the scale, noting the unit (usually kilograms or pounds).4. Playing and ScratchingWhen pets are not on the scale, they can play and sharpen their claws on the scratching board5. Cleaning and maintenanceClean the surface of the cat scratching board scale regularly to remove debris or dirt left by your cat when sharpening its claws.If powered by batteries, check the battery charge regularly and replace the batteries in time.Avoid contact of the cat scratching board scale with water or other liquids to avoid damage to the internal circuit.6. NotesPlease make sure your pet is in a safe position when using the cat scratching scale and do not let them jump or slam into the cat scratching scale.If your pet shows discomfort or resistance to the cat scratching post scale, please guide them patiently and do not force them to use it.Smart Symbol Tips"Lo" means the battery is low and needs to be replaced"OL" means overweight, please get off the scale"Er" means the sensor is faulty, please contact the manufacturerMaterial: ABS, corrugated paperPower supply: AAA battery*3Material: 1.2kgWeighing range: 50g-15kgWeighing unit: kg/jin/lb Customer please read carefully the below shipping arrangement before purchase:• Customers must allow OneDegree to provide their contact information to the merchants for arranging the delivery service via the third-party logistics company. Please visit https://www.onedegree.hk/en-us/privacy-policy for more details about the policy of OneDegree Personal Information Collection Statement.• Products shall be delivered to the customer’s provided shipping address by ETTA International Limited ("Merchant") via using a third-party logistics company.• Delivery service is only available in Hong Kong (including Hong Kong Island, Kowloon, and the New Territories). An additional fee of HK$20 will apply for every floor if delivery requires going upstairs. • Delivery time may vary depending on individual merchants’ shipping schedule, generally, products shall be shipped to the customer's provided delivery address within approximately 14 working days from the issuance of the "OneDegree Pet Mart Order Confirmation Notice email" However, delivery times may be affected by traffic, adverse weather, public holidays, and other special circumstances.• If the customer provides incorrect delivery information, or if the logistics company is unable to contact the customer multiple times, or if the customer refuses delivery, resulting in the product being returned to the Merchant, Merchant may arrange re-delivery, the customer will be responsible for additional shipping costs. OneDegree shall not be held responsible.• Merchant offers a 12-month self-carry warranty service for non-human damage, starting from the issue date of "OneDegree Pet Mart Order Confirmation Notice". The warranty period will not be extended or renewed for any repaired or replaced parts or products. Customers must present the "OneDegree Pet Mart Order Confirmation Notice" issued by OneDegree via email as the proof of purchase to enjoy warranty service. If the customer fails to provide this or if the information is incomplete, Merchant will refuse to provide maintenance services. For any inquiries regarding product maintenance, please call ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm).• Customers must agree to allow OneDegree to share their contact information for Merchant to arrange delivery of products. Merchant will contact the customer before delivery to confirm arrangements. If the customer needs to change delivery details, please contact ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm).• In case of any disputes, ETTA International Limited reserves the right to make the final decision.

Introduction:&nbsp;
 High-precision sensor, can sense ±2g weight change, weigh while playing, no more embarrassment of weighing your cat while holding it Always know your cat's weight and health status. The design is simple and elegant, perfectly integrated into the modern home space. Description: 1. Cat's Paradise Weighing, lying, grabbing and playing all in one, a cat's playground on the scale. It is not only a cat scratching board where cats can sharpen their claws and play to their heart's content, but it also has an integrated weighing scale function, allowing owners to easily monitor their pets' weight changes. 2. Intelligent design: This product uses advanced sensor technology to quickly and accurately measure your pet's weight.&nbsp; 3. Replaceable cat scratching post, economical, environmentally friendly, double-sided. For the money of a cup of milk tea, I can buy a new scratching board for my pet. Instructions for use: 1. Product Preparation Make sure the cat scratching post scale is placed on a flat and stable surface. Check the batteries or power connection (depending on the model) on your cat scratching post scale to make sure there is adequate power. Make sure the scratching post scale surface is clean and free of any obstructions or debris. 2. Use the cat scratching board function Guide your cat to the scratching post scale and let them get familiar with the new toy. Cats will naturally use their claws to sharpen the surface of the scratching board, which can satisfy their natural habits and help them keep their claws healthy. 3. Use the scale function When you want to weigh your pet, make sure your pet is standing in the center of the scratching post scale and remains stable. Turn on the scale (usually by pressing a button or touching the screen). Wait a few moments to allow the scale to accurately measure your pet's weight. Read the number on the scale, noting the unit (usually kilograms or pounds). 4. Playing and Scratching When pets are not on the scale, they can play and sharpen their claws on the scratching board 5. Cleaning and maintenance Clean the surface of the cat scratching board scale regularly to remove debris or dirt left by your cat when sharpening its claws. If powered by batteries, check the battery charge regularly and replace the batteries in time. Avoid contact of the cat scratching board scale with water or other liquids to avoid damage to the internal circuit. 6. Notes Please make sure your pet is in a safe position when using the cat scratching scale and do not let them jump or slam into the cat scratching scale. If your pet shows discomfort or resistance to the cat scratching post scale, please guide them patiently and do not force them to use it. Smart Symbol Tips "Lo" means the battery is low and needs to be replaced "OL" means overweight, please get off the scale "Er" means the sensor is faulty, please contact the manufacturer Material: ABS, corrugated paper Power supply: AAA battery*3 Material: 1.2kg Weighing range: 50g-15kg Weighing unit: kg/jin/lb
Customer please read carefully the below shipping arrangement before purchase: • Customers must allow OneDegree to provide their contact information to the merchants for arranging the delivery service via the third-party logistics company. Please visit https://www.onedegree.hk/en-us/privacy-policy for more details about the policy of OneDegree Personal Information Collection Statement. • Products shall be delivered to the customer’s provided shipping address by ETTA International Limited ("Merchant") via using a third-party logistics company. • Delivery service is only available in Hong Kong (including Hong Kong Island, Kowloon, and the New Territories). An additional fee of HK$20 will apply for every floor if delivery requires going upstairs. • Delivery time may vary depending on individual merchants’ shipping schedule, generally, products shall be shipped to the customer's provided delivery address within approximately 14 working days from the issuance of the "OneDegree Pet Mart Order Confirmation Notice email" However, delivery times may be affected by traffic, adverse weather, public holidays, and other special circumstances. • If the customer provides incorrect delivery information, or if the logistics company is unable to contact the customer multiple times, or if the customer refuses delivery, resulting in the product being returned to the Merchant, Merchant may arrange re-delivery, the customer will be responsible for additional shipping costs. OneDegree shall not be held responsible. • Merchant offers a 12-month self-carry warranty service for non-human damage, starting from the issue date of "OneDegree Pet Mart Order Confirmation Notice". The warranty period will not be extended or renewed for any repaired or replaced parts or products. Customers must present the "OneDegree Pet Mart Order Confirmation Notice" issued by OneDegree via email as the proof of purchase to enjoy warranty service. If the customer fails to provide this or if the information is incomplete, Merchant will refuse to provide maintenance services. For any inquiries regarding product maintenance, please call ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm). • Customers must agree to allow OneDegree to share their contact information for Merchant to arrange delivery of products. Merchant will contact the customer before delivery to confirm arrangements. If the customer needs to change delivery details, please contact ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm). • In case of any disputes, ETTA International Limited reserves the right to make the final decision.