Introduction: 

Homerun uses wireless magnetic sensors to supply technology, safe and clean; carefully designed 20 tone channel, tone low to 20dB: through triple filter, drain water source. The external equipment is equipped with the design of separation of internal and external buckets, and has intelligent functions such as anti failure system, material protection system, core alarm and so on. With the gurgling water of the new gurgling, the owner is more at ease when he loves to drink water.
No line water machine + no line water pump, free release. The body of the semi permeable frosted bottle can be seen everywhere. The three effluent modes can be used in multiple landscapes. The water capacity of the pump is up to 2L, and the water consumption of an adult animal is about 5 7 days. When the owner travels for a short time, he can drink fresh water every day.


Point:
1. No line pump. The water is separated to make it safer. The original line water pump is developed by ourselves, which uses the non linear magnetic induction to prolong the service life of the technology which is not easy to oxidize at the same time, so it is more convenient to clean. Three physical quarantines (pump quarantine, inner barrel quarantine, outer barrel isolation) make the water tank separate, do not lead to leakage, and the safety performance is more reliable.
2. Sleep level tone. In order to reduce the noise caused by water flow, we have carefully designed 20 sound channels and added sound technology to the pump, so that the work division has been reduced to 20dBh, which is almost insensitive.
3. Clear and fresh water. Modeling the gurgling water spring of the new stream, the water loop keeps the water clean for a long time, and the core is protected by high density microporous cotton and large straight coconut activated carbon raw materials, such as wool cutting, dust to chlorine, and so on.
4. Large capacity of water supply. A week to drain water, a bucket to do. The water capacity of the water machine is up to 2L, which is about 5 7 days for an adult animal. When the owner travels for a short time, he can drink fresh water every day.
5. Clear the dead corner. Bucket and outer bucket use separate design, the inner wall is as bright as a bowl, there is no nook and cranny, a wipe cleaning is easier.
6. Environmental protection saves money. It is supplied by 5V 1A, which is as low as 1.5C a month. The design of the inner barrel is depressed, and the principle of bottom suction of the pump is used, and the remaining water is less than 200ml, which is more in line with the concept of energy environmental protection.
7. It's clear.
a. Anti jamming system: when the water level is too low, the pump will automatically stop working, and there will be a water shortage indicator to remind you.
b. Material protection system: the outer barrel filling base supports the FOD inspection function. If there is a gold deposit, the automatic feed line water pump will be stopped, which makes it safer to use.

How to use the water machine
1. First, take out the inner bucket.
2. Insert the outer barrel and supply it with an orchestrator.
3. Take away the drains and drains from the inner bucket.
4. Pour water into the inner bucket, pay attention to the water level, not higher than the Max water level line
5. Wipe the water on the outer wall of the inner barrel.
6. Then put the drain and outlet into the inner barrel.
7. Scrub the water from the inner wall of the outer bucket
8. Put the inner barrel into the outer barrel.

A hint of happiness
1. Water cooler cores and accessories (including inner buckets, outlet pipes, pumps, sea pipes) are recommended to be cleaned at least once per tank, and clean the water source more thoroughly, so as to avoid sinking and blocking the pump to cause water outflow and fungus breeding.
2. Do not use more than 40 degrees of water washing machine or heating water machine, which can easily lead to the use of the water machine.
3. Please keep the outer bucket of the water cooler dry and do not wash or soak.
4. Please use the original power supply adapter to supply the water turbine, otherwise it may affect the normal operation of the water turbine.
5. If you place the water cooler at the level level, the tilting may affect the normal operation of the water cooler.

Feature:

1. It's really not stuck. Shape, square, triangle, whatever you want to eat, your heart is not accurate, out of order, card problems all do not exist.

2. Anti card system.

a. The distribution of the new quartile is not stuck. If you divide the meal into equal portions, APP can set up more than one portion at a time, and the standard standard is about the amount of food.

b. In the process of transformation, there is a slippery flow. The Gui stock plan is equipped with an ancient flexible brush to make the stock missing in an orderly manner.

c. It can be upgraded to a standard, and a hard sized one can also be done. It has a full capacity and a height of 54mm. It can also serve wine with a variety of balls and shaped ice.

d. External response, out of the anti blocking. The actual status of the external eye transmitter in the village ensures that the material Weir is normal.

3. It is equipped with many kinds of oils (dry, dry, expanded, dry) and dry (the maximum direct line that supports the rack is 12mm), and there is no problem with full storage.

4. 6 months without interruption. The 180 day battery has the ability to fly, so say goodbye to worry. What's better, your food dispenser will no longer be overcharged and will be distracted wherever you put it.

5.Real warranty technology. Keep cooking for 15 days, and each taste is crunchy.

A. 360 °seal. In the lower style, seal the ring with three rings in order to prevent the damage.

b. Pick up the drying box. Place dryness and moisture-proof once a month

c. Close the outlet. Check the automatic copy bit and enter the air defense system.

6. Intelligent app scientific research to realize "intelligent scientific research"

Disassembly cleaning

1. Remove the shroud. Open the shroud first, press the buckle with your finger, and pull it out hard at the same time

2. Take off the bucket. Move the buckle of the bucket, release the bucket, hold the bucket and take it out.

3. Take it out. Put the bucket upside down, hold it well, and take it off with your neck open.

4. Pay attention to cleaning. Load, host body, wipe with chili cloth, then wipe with chili cloth

Install after cleaning (please remind me that the bottom should be hung for thousands before installation! )

1. It is necessary to spin the large buckle on the standard barrel to the perfect fit for the large slot on the standard barrell.

2. Install the bucket. If you put the bucket flat on the host machine, you must buckle it.

3. Install the device. On the way, the card buckle will put the standard wine into the card slot to complete the installation.

4.Install food basins. The bowl is placed on the base of the basin, the base of the basin is fastened to the host, and the installation is completed.

Method of use

1. Open the top plate.

2. Add half a barrel of bread

3. App Setting

Tips for reminders

1. The shipping plan needs to be configured through APP, and the number of copies and time can be set after the appliance is set.

2. In the battery mode, APP process control is not supported, and the machine will be operated according to the previously set plan.

3. The eater supports Wifi 2.4G network, but does not support Wifi 5G. Please make sure that the router supports remote segment network before checking.

4. Do not put the food dispenser in the environment of the tide, and do not let the base of the food dispenser be immersed in water.

5. It is recommended that the food dispenser be dried once a month to achieve the best drying effect.

Heavy 2.01kg

Barrel capacity: 4L (about 2kg)

Product quality: ABS, 304mm.

Fixed power: 10W

Fixed input: 5V

Consumer electronics: 220V

Wireless connection: WiFi 2.4G

Customer please read carefully the below shipping arrangement before purchase
• Products shall be delivered to the customer’s provided shipping address by ETTA International Limited ("Merchant") via using a third-party logistics company. Please visit https://www.onedegree.hk/en-us/privacy-policy for more details about the policy of OneDegree Personal Information Collection Statement.
• Delivery service is only available in Hong Kong (including Hong Kong Island, Kowloon, and the New Territories). An additional fee of HK$20 will apply for every floor if delivery requires going upstairs.
• Delivery time may vary depending on individual merchants’ shipping schedule, generally, products shall be shipped to the customer's provided delivery address within approximately 14 working days from the issuance of the "OneDegree Pet Mart Order Confirmation Notice email" However, delivery times may be affected by traffic, adverse weather, public holidays, and other special circumstances.
• If the customer provides incorrect delivery information, or if the logistics company is unable to contact the customer multiple times, or if the customer refuses delivery, resulting in the product being returned to the Merchant, Merchant may arrange re-delivery, the customer will be responsible for additional shipping costs. OneDegree shall not be held responsible.
• Merchant offers a 12-month self-carry warranty service for non-human damage, starting from the issue date of "OneDegree Pet Mart Order Confirmation Notice". The warranty period will not be extended or renewed for any repaired or replaced parts or products. Customers must present the "OneDegree Pet Mart Order Confirmation Notice" issued by OneDegree via email as the proof of purchase to enjoy warranty service. If the customer fails to provide this or if the information is incomplete, Merchant will refuse to provide maintenance services. For any inquiries regarding product maintenance, please call ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm).
• Customers must agree to allow OneDegree to share their contact information for Merchant to arrange delivery of products. Merchant will contact the customer before delivery to confirm arrangements. If the customer needs to change delivery details, please contact ETTA International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10am – 6pm).
• In case of any disputes, ETTA International Limited reserves the right to make the final decision.