Function introduction:
There are 15 proprietary 39 °T intelligent dryers, equipped with NTC intelligent control technology, the most comfortable 39 ℃ alloy feel of the model dog, the brushless DC machine, the tone is reduced to 40db, using the Archimedes helix principle to form a vertical loop channel, bottom feed, dry dead corner: built-in high-precision sensors and overload protection components, fully protect the safety of goods. 62L large space and window window, improve the drying system of human-user interaction in an all-round way, SPA comfortable care, intelligent control, to avoid errors caused by large differences.

Benefit:

a. Intelligent control: keep the dog at ease, reject hypoxia and pain, warm in winter, comfortable in summer, and everything is fine. NTC Tech. (patent number: 202010992714.0). The temperature of ±1 degree is controlled by the environmental temperature: when the temperature is more than 16 degrees, the lowest actual temperature is the temperature.

b. One machine can be used in many ways. A Horman oven = oven + oven + disinfectant refuses to be idle, and there is no limit.

c. Weather mode, which can be used when not in use, warm in winter and summer, and practical pull.

d. The flavor mode of bacteria. After drying, start the active oxygen generator and fully disinfect the inside of the drying box. The sterilization efficiency is as high as 97%. Daily disinfection can also be carried out on food pots, toys and other items.

e. You can love the dryer that blows and sleeps. The tone of the song is as low as 40db, and the soft tone does not stimulate sensitive feelings and enjoy the pleasant light of blowing hair.

f. Mao Yun is reasonable. Baking and blowing together to blow out healthy hair. 300 yuan of hair, less hair, soft hair, smooth every fried hair.

g. Open the window. 1. Open and close the window. It is used in the section where the goods are relatively unfamiliar to the drying box at the initial stage, and the owner can go through the window in the process of using the drying box. 2. A complete set of windows. If you are familiar with and adapt to the dryer, the owner can accompany you in the process of using the dryer.

h. Let go of the game. Unlock the screen operation, slide the release. Feel sensitive, operation list: the sliding release function can effectively avoid mis-contact.

Use the license:

1. Regular operations:

a. Turn on the power supply for a long time

b. Slide to solve the problem, and press the button to light up after success.

c. If you slide again, you can load it. After success, only the power source and setting button will be lit.

d. Short press the power source to light up.

e. The brightness of the power source can be reduced by long-term pressure.

f. Press the power source shutdown again

2. Drying mode setting

a. Short press mode press 「cut」 to soak drying / fast drying mode

b. Enter the settings according to the settings, and improve the degree of integrity by increasing the number of settings.

c. Press the settings to enter the time settings again, and adjust the working hours by adding and adjusting the working hours

d. Once again, set the input speed according to the configuration, and adjust the speed by increasing the speed.

e. After the setup is complete, click on the start and stop button to start the operation.

Tip: during the drying process, you can adjust the speed by increasing the temperature at any time.

Tip: after the parameters are set, the next time you enter the drying mode, you can start the start-up session directly.

3. Warm winter weather mode (please remove the window before using this mode)

a. Short press mode press「cut」to warm in winter mode

b. Enter the settings according to the settings, and improve the integrity by increasing the number of settings.

c. Once again, set the input speed according to the configuration, and adjust the speed by increasing the speed.

d. After the setup is complete, click on the start and stop button to start the operation.

Tip: during the operation process, you can adjust the speed by increasing the speed from time to time.

Tip: after the parameters are set, the next time you enter the warm winter mode, you can start the switch directly.

4. Summer weather mode (please remove the window before using this mode)

a. Press the short press mode and press 「cut」 to 「summer」 mode.

b. Once again, set the input speed according to the configuration, and adjust the speed by increasing the speed.

Tip: during the operation process, you can adjust the speed by increasing the speed from time to time.

5. How to use the fungus mode (please install the window and close the door before using this mode. In the mode of fungus smell, please do not let the material into the drying oven.)

a. Short press mode press「cut」 to fast drying mode

b. Then press「Flavor and Mode」 to enter the bacterial flavor mode.

c. Press the start and stop button to start the operation

Tip: in order to avoid entering this mode, the operation will slightly wait for 30 minutes after the bacteria are finished, the live oxygen will be completely dissipated, and then the product will be used again.

6. Daily cleaning

a. After the solution, press the power source to turn it off.

b. Turn off the power supply and unplug the power supply.

c. Remove the hair from the suction mouth.

d. And wipe the inside of the box with a dishcloth.

e. If there is sewage, the bottom drainage hole plug can be removed.

f. Disassemble and wash the rear seat

g. Cotton can be washed with clean water, dried through the net, and then packed back.

Pay attention to things:

while before use

1. Open the door, remove the window window, and treat the goods as dogs / dogs for days to suit the internal environment of the oven.

2. Open the summer warm / winter warm mode, and let the objects explore and adapt to the sound emitted by the drying oven in the case of low speed.

while in use

1. Please do not allow the goods to open the line range for easy inspection and immediate safety:

2. It is recommended to open the drying mode first, so that the soft speed and sound can make things adapt more quickly.

3. After the status of the puppy and the dog is set, slowly increase the speed or switch to the fast drying mode, and check the condition of the product at any time and adjust it at the right time.

Customer please read carefully the below shipping arrangement before purchase

• Products shall be delivered to the customer’s provided shipping address by Etta International Limited via using own Courier Service, their own logistics company.
• Delivery service is only available in Hong Kong (including Hong Kong Island, Kowloon, and the New Territories). An additional fee of HK$20 will apply for every floor if delivery requires going upstairs.
• Delivery time may vary depending on individual merchants’ shipping schedule, generally, products shall be shipped to the customer's provided delivery address within approximately 14 working days from the issuance of the 「Product Payment Confirmation Receipt」. However, delivery times may be affected by traffic, adverse weather, public holidays, and other special circumstances.
• If the customer provides incorrect delivery information, or if the logistics company is unable to contact the customer multiple times, or if the customer refuses delivery, resulting in the product being returned to Etta International Limited, Etta International Limited may arrange re-delivery, the customer will be responsible for additional shipping costs. OneDegree shall not be held responsible.
• Etta International Limited offers a 12-month self-carry warranty service for non-human damage, starting from the supplier's shipping date. The warranty period will not be extended or renewed for any repaired or replaced parts or products. Customers must present the「Product Payment Confirmation Receipt」sent by OneDegree via email as the proof of purchase to enjoy warranty service. If the customer fails to provide this or if the information is incomplete, Etta International Limited will refuse to provide maintenance services. For any inquiries regarding product maintenance, please call Etta International Limited customer service hotline 6840 5905 (Office hours: Monday to Friday, 10 am – 6 pm).
• Customers must agree to allow OneDegree to share their contact information Etta International Limited to arrange delivery of products by own Courier Service. Own Courier Service will contact the customer before delivery to confirm arrangements. If the customer needs to change delivery details, please contact Etta International Limited directly (Customer service hotline: 6840 5905, Office hours: Monday to Friday, 10 am – 6 pm).
• In case of any disputes, Etta International Limited reserves the right to make the final decision.